Datasheet

7
dc1369af
DEMO MANUAL DC1369A
Quick start proceDure
Internal Termination: Enables LVDS Internal Termination
• Off(Default):Disablesinternaltermination
• On:Enablesinternaltermination
Outputs: Enables Digital Outputs
• Enabled(Default):Enablesdigitaloutputs
• Disabled:Disablesdigitaloutputs
Output Mode: Selects Digital Output Mode
• FullRate:FullrateCMOSoutputmode(Thismodeis
not supported by the DC1369A, please use the DC1370)
• DoubleLVDS(Default):DoubledatarateLVDSoutput
mode
• DoubleCMOS:DoubledatarateCMOSoutputmode
(This mode is not supported by the DC1369A, please
use the DC1370)
Test Pattern: Selects Digital Output Test Patterns
• Off(Default):ADCdatapresentedatoutput
• AllOut=1:Alldigitaloutputsare1
• AllOut=0:Alldigitaloutputsare0
• Checkerboard:OF,andD13-D0Alternatebetween101
0101 1010 0101 and 010 1010 0101 1010 on alternat-
ing samples.
• Alternating:Digitaloutputsalternatebetweenall1’sand
all0’sonalternatingsamples.
Alternate Bit: Alternate Bit Polarity (ABP) Mode
• Off(Default):Disablesalternatebitpolarity
• On:Enablesalternatebitpolarity(BeforeenablingABP,
be sure the part is in offset binary mode)
Randomizer: Enables Data Output Randomizer
• Off(Default):Disablesdataoutputrandomizer
• On:Enablesdataoutputrandomizer
Two’s Complement:EnablesTwo’sComplementMode
• Off(Default):Selectsoffsetbinarymode
• On:Selectstwo’scomplementmode
Once the desired settings are selected hit OK and PScope
will automatically update the register of the device on the
DC1369A demo board.