Datasheet

2
dc1009af
DEMO MANUAL DC1009A
QUICK START PROCEDURE
Figure 1.
Connect the DC1009 to a DC590 USB serial controller using
the supplied 14 conductor ribbon cable. Connect DC590
to the host PC with a standard USB A/B cable. Run the
evaluation software supplied with DC590 or downloaded
from www.linear.com/software. The correct program will
be loaded automatically. Click the collect button to start
reading the input voltage. The software allows for selecting
the input channel, single-ended or differential mode and
50Hz/60Hz rejection settings. Selecting 2x speed located
at the bottom of the strip chart display will double the data
output rate at the expense of offset accuracy (LTC2492
and LTC2486 only).
Tools are available for logging data, changing reference
voltage, changing the number of points in the strip chart
and histogram, and changing the number of points aver-
aged for the DVM display.