Datasheet
ADV7390/ADV7391/ADV7392/ADV7393 Data Sheet
Rev. J | Page 20 of 107
Pin No.
1
Mnemonic
Input/
Output Description
ADV7390/
ADV7391
ADV7392/
ADV7393
ADV7390
WLCSP
24 30 A1 R
SET
I Controls the amplitudes of the DAC 1, DAC 2, and DAC 3
outputs. For full-drive operation (for example, into a 37.5 Ω
load), a 510 Ω resistor must be connected from R
SET
to AGND.
For low-drive operation (for example, into a 300 Ω load), a
4.12 kΩ resistor must be connected from R
SET
to AGND.
23 29 C2 COMP O Compensation Pin. Connect a 2.2 nF capacitor from COMP
to V
AA
.
N/A N/A B1 DAC 1 O DAC Output. Full-drive and low-drive capable DAC
22, 21, 20 28, 27, 26 N/A DAC 1, DAC 2,
DAC 3
O DAC Outputs. Full-drive and low-drive capable DACs.
12 14 F3 SCL I I
2
C Clock Input.
11 13 F2 SDA I/O I
2
C Data Input/Output.
10 12 E3 ALSB I ALSB sets up the LSB
3
of the MPU I
2
C address.
14 20 D3
RESET
I Resets the on-chip timing generator and sets the
ADV7390/ADV7391/ADV7392/ADV7393 into its default
mode.
19 25 C1 V
AA
P Analog Power Supply (2.7 V or 3.3 V).
5, 28 6, 35 A3, D4 V
DD
P Digital Power Supply (1.8 V). For dual-supply
configurations, V
DD
can be connected to other 1.8 V
supplies through a ferrite bead or suitable filtering.
1
1
A5
V
DD_IO
P
Input/Output Digital Power Supply (1.8 V or 3.3 V).
17 23 E1 PV
DD
P PLL Power Supply (1.8 V). For dual-supply configurations,
PV
DD
can be connected to other 1.8 V supplies through a
ferrite bead or suitable filtering.
16 22 E2 EXT_LF I External Loop Filter for the Internal PLL.
15 21 F1 PGND G PLL Ground Pin.
18 24 D1 AGND G Analog Ground Pin.
6, 29 7, 36 C3, D5 DGND G Digital Ground Pin.
32 40 D2 GND_IO G Input/Output Supply Ground Pin.
EPAD G Exposed Pad. Connect to analog ground (AGND).
1
N/A means not applicable.
2
ED = enhanced definition = 525p and 625p.
3
LSB = least significant bit. In the ADV7390/ADV7392, setting the LSB to 0 sets the I
2
C address to 0xD4. Setting it to 1 sets the I
2
C address to 0xD6. In the
ADV7391/ADV7393, setting the LSB to 0 sets the I
2
C address to 0x54. Setting it to 1 sets the I
2
C address to 0x56.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.