Setup Guide

MIDI Setup Guide: MIDI Control with 3rd Party Applications
4•4
You should now see your UX8/UX2 device congured accordingly. Exit the Preferences if all
settings appear as shown here:
Please see the next section for how to map your UX8/UX2 controllers to Reason parameters.
Configuring Line 6 MIDI Controllers with Remote Override
Reason also offers its “Remote Override” feature, which is an easy way to allow Reason to “learn” the
MIDI message coming from your MIDI control device and instantly map it to a Reason parameter. You
can use the Remote Override options whether you have the KB37 Reason Remote conguration, or for
your UX2/UX8 when congured as a generic MIDI Control device. If you are using a KB37, you can
keep it configured with the steps outlined in the first sections of this chapter.
If you are using a Line 6 UX2 or UX8 device, follow the steps in the previous section to congure
your device as a MIDI Control Surface. Then launch the Line 6 Audio-MIDI Devices dialog and go
to MIDI tab.
Here you can select the Reason
3 preset, then click the Settings
button to launch the MIDI
Control Settings dialog.