Setup Guide

MIDI Setup Guide: MIDI Control Configuration
2•3
To follow is an example of the MIDI Control Settings dialog, as displayed with a connected KB37
device. Note that if you have a UX2 or UX8, you’ll see only the Controllers offered by those devices
(Footswitch 1 & 2 for UX2 and Footswitch 1 &2 and Expression Pedal for UX8). See the following
descriptions for details on the fields within the MIDI Control Settings dialog.
The Switch/Controller column populates with all re-
assignable controllers for your device (KB37 shown here)
Name and save your custom
mapping as a preset
Choose which GearBox Control
function (if any) to assign to the
respective Controller
Choose the type of Control, which
CC/Action it will perform, and the
Switch Mode for each respective
controller
Click Apply to commit
the displayed settings to
your device, then OK to
exit the dialog
Switch/Controller - Lists the physical wheel, button, knob or pedal controllers available on your POD
Studio/TonePort device.
GearBox Control - Allows you to select from a menu what action is performed in the GearBox software
when the Controller is accessed. Note that you can choose “None” to disable any controller.