User Manual
System Setup
2•11
• Tempo Sync (Knob 3): The “Speed” or “Time” parameters of all tempo-based
FX (Modulation, Pitch & Delays) can optionally be set to a note value to follow
the (Knob 4) Tempo BPM value. This Tempo Sync option is a global setting that
allows you to choose whether the FX follow the Tap Tempo as a per-Preset value
or globally.
• Preset: Tempo settings are saved and recalled on a per Preset basis.
• Global: Tempo information stored within any Preset is ignored. When saving a
Preset while this option is set to “Global,” the current tempo value will be saved
with the Preset.
• Tempo (Knob 4): Enter in a specic “Tap Tempo” for your current Preset (as
opposed to pressing rhythmically on the TAP button). This value is saved individually
per Preset.
Page 7, Setup: Variax Options
Setup Page 7 - No Variax connected Setup Page 7 - James Tyler Variax connected
As illustrated above, Setup page 7 will display additional, model-specic options when
a Variax instrument is connected to the POD HD Pro X VARIAX (VDI) input. The specic
Variax family and rmware version are displayed at the top right of the screen when the
Variax is connected. Available options and behaviors displayed will dier depending
on the Variax type and model you have connected, as described in the following
sections. With any Variax connected to the VDI input, the Knob 1 option functionality
is as follows.
• Variax Control (Knob 1): Choose whether you want to assign all your Variax
settings on this Setup pg 7 screen on a per Preset basis or Globally.*