User Manual
Appendix C: MIDI
C•7
• Message Type (Knob 2): Select the type of MIDI message sent by the
selected control.
• FS1 - FS8, LOOPER, TAP and EXP TOE SWITCH footswitches can each be
assigned to send MIDI CC, CC Toggle, Program Change (xed), Bank Change
(xed) or Note On messages.
• The EXP1 and EXP2 pedal controls can be assigned to each send one MIDI CC
with a denable Value Range, which allows you to sweep a variable parameter
on your target device.
• CC/Program/Bank # (Knob 3): Selects further options, depending on the
Message Type selected (Knob 2).
• CC #: When the Message Type is “CC” or “CC Toggle,” this allows the choice
of any MIDI CC number from 000 to 127. If editing EXP1 or EXP2 controls, this
knob sets the Minimum CC value for the pedal. (Also see the Knob 4 Value
description.)
• Program #: When the Message Type is “Program Change,” this allows the
choice of a xed Program Value of 000 to 127.
• Bank #: When the Message Type is “Bank Change,” this allows the choice of
xed Bank Value of 000 to 127. Note that an additional Program Change #001
message is automatically sent as well, which typically results in selecting the
rst patch within the selected Bank on your receiving device.
• Note: When the Message Type is “Note On,” this allows the choice of the
specic musical note value (C0 to G9)
• Value/Velocity (Knob 4): Selects further options, depending on the Knob 2
and Knob 3 settings.
• Value (CC): When the Message Type is “CC,” this sets the value for the CC that
is sent on every press of the switch control (000 - 127). When editing the EXP1
or EXP2 controls, this sets the Maximum Value for the pedal.
• Value (CC Toggle):When the Message Type is “CC Toggle,” you can select 000
or 127 to choose an “On” or “O.” The control sends alternating messages per
click - Perfect got “MIDI Mute” messages!
• Note that no Knob 4 option is displayed if the Message Type is “Program
Change” or “Bank Change.”
• Velocity: Sets the Velocity value for the Note message (000 - 127).