User Manual
Appendix C: MIDI
C•4
*Note that you’ll need to set your “Footswitch Mode” Setup option to “ABCD” for this specic
Preset data to be sent when pressing the FBV FS5 - FS8 footswitches to change the Preset on
POD HD Pro X - see
“Page 1, Setup:Utilities Options” on page 2•2.
This feature allows you to use POD HD Pro X to control external devices by sending
the following MIDI Bank & Program Change commands. Also note that if you connect
to another Line 6 POD HD Pro X or POD HD500X, the connected device will follow the
Setlist & Preset loading behavior of the initial POD HD Pro X!
The following describes the automatic MIDI messages sent when these POD HD Pro
X/FBV controls are accessed when using specic gestures.
SAVE
HOLD FOR SYSTEM & I/O
VIEW
P
R
E
S
E
T
S
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF
PRESETS Knob
ENTER Button
4-Way Nav. Disc
Arrow Buttons
POD HD Pro X Controls that transmit Bank & Program Changes
• Turning the PRESETS Knob: Internally on POD HD Pro X, turning clockwise
and counter-clockwise increments & decrements through Presets in the
current Set List. These actions also send the following MIDI messages:
• Clockwise turn: Transmits a Program Change - Increment message.
• Counter - clockwise turn: Transmits a Program Change - Decrement
message.
• Press FBV Footswitches A, B, C & D: Internally this selects the respective
Preset within the current Bank. These switches also transmit MIDI Program
Change - Fixed messages, with Values from 0 to 64. The specic value is
determined by the current Bank (e.g. - for Bank 1 these four footswitches
send Values 0 - 3, for Bank 2 they send Values 4 - 7, etc.)