User Manual
Appendix B: FBV Foot Controllers
B•24
• Click the EXP TOE SWITCH switch so that the red EXP 1 LED is lit.
• In the Signal Flow View, select the Volume FX block and toggle it “O” using the
ENTER button. You should now see the Wah “On” and the Volume “O.”
Wah in “On”
Volume is “O”
• Repeat the previous Footswitch Assign steps for both the Wah and the Volume,
assigning each to the EXP TOE SWITCH.
• Now whenever you click the EXP TOE SWITCH to EXP 1 for this Preset, the Volume is
switched “O” and the Wah is switch “On” and is controlled by the Pedal - and
vice versa when switching to EXP 2.
• Be sure to save to retain these settings with your Preset!
Set List Select
For FBV Shortboard MKII & FBV Longboard devices, you can access the Set Lists
screen and load a dierent Preset (also see “Set Lists & Presets” on page 4•1). To do
this from your FBV:
• Press FUNCTION 2 (Shortboard MkII) or AMP 1 (Longboard) and you’ll see the Set
Lists screen displayed on your POD HD Pro X.
The Set Lists screen