User Manual

Appendix A : Reference
A•1
Expression Pedal 1 1 0 to 127
Expression Pedal 2 2 0 to 127
Tap Tempo 64 2 taps determine tempo
Appendix A : reFerence
MIDI Control
The M9 will send and receive MIDI CC and Program Change messages on any MIDI
Channel from 1 thru 16 or Omni, selectable from the MIDI screen in Setup mode. MIDI
implementation includes MIDI CCs for Looper Control, FX Unit On and Bypass messages,
Tap Tempo, Expression Pedal CCs and Program Change messages for Scene select. It is
therefor possible to control the M9 from a MIDI controller or a computer sequencer.
The most common application would probably be to use a separate MIDI controller to
control the M9 Looper, so that all 6 Scene select switches on the M9 would be available
for individual FX control.
Individual Model selection and assignment for each FX Unit from the 5 different FX
groups is not implemented, but individual FX loaded into the A and B memory locations
of all 3 FX Units can be engaged or bypassed via MIDI CCs. The MIDI Reference Tables
in this chapter represent the currently implemented MIDI spec.
Looper & Expression Pedals
M9 Footswitch MIDI CC# Looper Function
Record/Overdub 50 0 to 63 = Overdub 64 to 127 = Record
Play/Stop 28 0 to 63 = Stop 64 to 127 = Play
Half Speed 36 Toggles between Half Speed & Normal Speed
Reverse 85 Toggles Reverse On or Off
Undo/Redo 82 Activates Undo/Redo
Play Once 80 Activates Play Once function
Pre/Post (in Setup) 84 0 to 63 = Pre 64 to 127 = Post
Looper Control 86 0 to 63 = Exit 64 to 127 = Enter