User Manual

Model Details
3•4
Tube Compressor Model
In addition to the 5 compressors taken from the original M13 Stompbox Modeler, which
are all typical stomp box type compressors, we’ve included a new Tube Comp model in
the M9 based on the studio classic Teletronix LA-2A® Optical Compressor, known for
its smooth, easy to adjust, tube sound. You’ll find it at the end of the Distortion FX group.
Here’s how it works:
• Adjust Knob 1 to set the Threshold - lower values result in more compression, along
with an automatic makeup gain stage dependent upon the Threshold setting.
• Set the output Level with Knob 2. To use the Tube Comp model for boost only, use
a high Threshold value and adjust your Level as desired.
*For a detailed look at all the FX models in the M9 (over 100 of them), please download
the M9 & M13 v2.0 FX Parameters pdf at www.line6.com/manuals.
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. Teletronix LA-2A is a registered trademark of Universal Audio Inc.
Tube Comp
1A
THRESH
DIST LEVEL