User Manual

Setup Details
2•4
Dim
With the v2.0 updatee we’ve added a new feature that allows you to turn off the Dim
setting for FX that are not active. With Dim set to OFF, only the active FX LEDs will be
lit. All other LEDs will be off, making it easy to see which FX are currently ON. With
Dim set to ON, the inactive FX LEDs will be dimly lit.
Auto Save & Manual Save
Knob 2 in Setup screen 3 toggles between Auto Save and Manual Save. With Auto Save,
every change you make to your Scene is saved, like a real pedal board. So if you select
another Scene then return to the previous Scene, your settings will be just as you left them.
With Manual Save, changes made to your individual FX will be retained only if you don’t
change Scenes; if you do select a different Scene, all your changes will be lost. Manual
Save is a good choice, however, when you want to be sure your Scenes will always be
recalled exactly as you originally programmed them. See Chapter 4 for more details.
Scene Modes
Knob 5 selects Momentary Scene or Latch Scene mode. In brief, Momentary mode lets
you select a Scene and be able to tweak the individual FX in that Scene, where Latch
mode lets you select a different Scene with each switch press.
The above graphic illustrates the LCD display for Scene Select mode. When in Latch
Scene mode, the LCD remains displayed like this each time you select a Scene; in
Momentary Scene mode, upon selecting a Scene you’ll exit Scene Select mode, and the
LCD will display the first active effect in the Scene you’ve selected. See Chapter 4 for
more in-depth info on Momentary Scene and Latch Scene modes.
Relative Pots
The M9 features Relative Mode for knob control, a popular user request. Use Knob 4 to
select it. When you turn a knob with Relative Mode on, your parameter setting won’t
jump to the physical knob position, but will adjust its value smoothly, relative to the knob’s
current position. The other setting is Absolute, which means when you ‘wake up’ a knob
by turning it, your parameter setting will instantly jump to the physical knob position.
To get to the fourth and final Setup screen from here, press the Model Select knob again.
A
B
B
A
B
A
TO CANCEL
Select
Scene
PRESS TAP