® M13 Stompbox Modeler Pilot’s Handbook Manuel de pilotage Pilotenhandbuch Pilotenhandboek Manual del Piloto An in-depth exploration of the advanced technologies and pulsing tonal pleasures of M13 Stompbox Modeler. See www.line6.com/manuals for additional info 40-00-0167 Electrophonic Limited Edition available @ www.line6.
The serial number can be found on the bottom of your M13 Stompbox Modeler. It’s the number that begins with “(21)”. Please note it here for future reference: SERIAL NO: WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: To reduce the risk of fire or electric shock, do not remove screws. No user-serviceable parts inside. Refer servicing to qualified service personnel.
Please Note: Line 6, DL4, MM4, FM4, DM4, Echo Pro, Vetta and Verbzilla are trademarks of Line 6, Inc. All other product names, trademarks, and artists’ names are the property of their respective owners, which are in no way associated or affiliated with Line 6. Product names, images, and artists’ names are used solely to identify the products whose tones and sounds were studied during Line 6’s sound model development for this product.
Overview FX M13 Stompbox Modeler packs in 80 models of classic and Line 6-original effects, pulled directly from our world renowned DL4, MM4, FM4, DM4 and Verbzilla stompboxes. • The 4 FX Units can run up to 4 effects at once, total. • Each FX Unit has 3 memories, which can run any model of any type—switching between the memories is like swapping out one stompbox for another.
POWER IN MIDI OUT EXPRESSION PEDAL 1 PEDAL 2
INPUT L(MONO) RIGHT FX RETURN L(MONO) RIGHT FX SEND L(MONO) RIGHT OUTPUT L(MONO) RIGHT
Details Constant Memory As you adjust an effect (say, a Screamer distortion running in effect memory A of FX Unit 1), those adjustments are retained as you switch away to a different A/B/C memory and back again—no save function is required. It’s just as if you were adjusting different physical stompboxes, each of which would still have the last knob settings you made to it.
Send/Return Jacks for External Effects or Amps The rear panel send/return jacks are stompbox/instrument level unbalanced connections that allow you to connect external devices in series with M13 Stompbox Modeler’s effects. From the SETUP mode, you choose where this occurs in the signal flow: before all FX Units, inserted between any one of them, or after them all. This setting is stored as part of each scene, so different scenes can use the send/return differently.
Or just run the full set of FX Units out to 2 amps in true stereo like so: You could also hook up like this, to put M13 Stompbox Modeler into your amp’s effect loop without using M13 Stompbox Modeler’s send/return jacks at all: To amp input INPUT L(MONO) RIGHT FX RETURN L(MONO) RIGHT FX SEND L(MONO) RIGHT OUTPUT L(MONO) RIGHT To amp Return From amp Send These are just a few examples. Be creative! True Bypass You can choose in SETUP whether to use the True Bypass or DSP Bypass.
