User Manual

49
Synchronizing Tempo via MIDI
Certain Delay and Modulation parameters such as Time and Speed can be repre-
sentedwithxednumericvalues(msorHz)ornotevalues(1/4-note,dotted1/8-note,
etc.). When set to note values, the parameter will follow Tap Tempo or incoming MIDI
clock. Press the parameter knob to toggle between ms (or Hz) and note values.
Harmony Delay
FeedbkTime
37%
Mix
35%1/4
Harmony Delay
FeedbkTime
37%
Mix
35%750 ms
By default, HX Stomp responds to MIDI clock received from external gear (or your
DAW software via USB). HX Stomp can also transmit MIDI clock to external gear or
software (transmit is disabled by default). MIDI clock reception (Rx) and transmission
(Tx) can be enabled or disabled from the "Global Settings > MIDI/Tempo" menu.
Inaddition,certainmodulationeectswithhavedistinctrhythmicelements;forex-
ample, a tremolo set to a square wave (sometimes called a "slicer") not only has a
tempo, but a beat, where the upswing of the wave lands with relation to your song.
Thatis,theeectmaybeinperfecttemposyncwithyoursong,butits"downbeat"
may be shifted ahead or behind of your drummer's—or in the studio, your recorded
song's—downbeat.
From Stomp or Scroll mode, on the downbeat of your song, press
TAP once.
Anybeatsync-based(sometimescalled"LFO")eectsresetfromthebeginning.
MIDI CC
HXStomphasreservedspecicMIDICCmessagesforglobalfunctions;theseCCs
cannot be used as controllers. If you attempt to learn a CC message reserved for
global functions (see "Controller Assign"), the following dialog appears:
This CC# is reserved!
Learn
MIDI CC# Value Function
Pedal and Footswitch Assignments
1
0-127 Emulates EXP 1 Pedal
2
0-127 Emulates EXP 2 Pedal
49
0-127 Emulates FS1
50
0-127 Emulates FS2
51
0-127 Emulates FS3
52
0-127 Emulates FS4
53
0-127 Emulates FS5
1 Switch Looper Controls
60
0-63: Overdub;
64-127: Record
1 Switch Looper Record/Overdub
61
0-63: Stop;
64-127: Play
1 Switch Looper Play/Stop
62
64-127 1 Switch Looper Play Once
63
64-127 1 Switch Looper Undo/Redo
65
0-63: Forward;
64-127: Re-
verse
1 Switch Looper Forward/Reverse
66
0-63: Full;
64-127: Half
1 Switch Looper Full/Half Speed
Additional Controls
0
n/a Bank MSB (unused, but reserved)
32
n/a Bank LSB (unused, but reserved)
64
64-127 Tap Tempo
68
0-127 Tunerscreenon/o
69
0-2,8and9
Snapshot select (0=Snapshot 1, 1=Snapshot 2,
2=Snapshot 3,8=Nextsnapshot,9=Previoussnapshot)
70
0-63: Bypass;
64-127: On
All Bypass
71
0-5
Footswitch Mode (0=Stomp, 1=Scroll, 2=Preset,
3=Snapshot, 4=Next footswitch mode, 5=Previous
footswitch mode)