User Manual

45
DI Recording and Re-amping
A common DAW recording technique is to record a dry DI (Direct Input) signal, such as
the unprocessed signal from your guitar. This lets you process the DI track later with
plug-ins (such as the Helix Native plug-in), and/or "re-amp" the DI track through an
amp or other outboard gear. HX Stomp has handy options built right in for recording
DItracks,aswellasforeasyre-amplicationofDItracksbackthroughyourownHX
Stomp tones, all without extra hardware or cabling!
HXStompoerstwospecialDIoutputs—USBOuts5and6,whicharefeddirectly
from the Main L/MONO and RIGHT inputs. Also note that USB Outs 7 and 8 are fed
directly (unprocessed) from the Return/Aux In L/MONO and RIGHT inputs for simulta-
neously tracking a stereo digital piano, synth, drum machine, or other device.
Recording a Dry DI Track
For this example, we'll record guitar into two DAW tracks simultaneously, with one
capturing the processed tone and the other the unprocessed DI guitar.
16B Pastor of Muppets
Harmony Delay
FeedbkTime
37%
Mix
35%1/8
Dry DI Guitar
USB
In 5
USB
In 1/2
Processed Guitar
TRACK 1 (Dry DI Guitar)
TRACK 2 (Processed Guitar)
L/MONO RIGHT
OUTPUT BAL/UNBAL
USB
L/MONO
INPUT
1. Create two new audio tracks in your DAW software project:
Create one mono track to record the dry DI guitar, and set the track's input
to HX Stomp USB 5.
Create one stereo track to record your full, stereo, processed tone and set
the track's input to HX Stomp USB 1/2.
2. Set both tracks' outputs, as well as the DAW Master output to
HX Stomp USB 1/2 to allow all tracks to play back through HX
Stomp.
NOTE: Setting the stereo track's output to Helix USB 1/2 allows you to hear
your processed tone via HX Stomp's hardware monitoring while recording.
Forthisconguration,disablesoftwareinputmonitoringonallDAWtracks.
3. Arm both these DAW audio tracks, hit the Record button and
start laying down your guitar performance!
Now you have your processed track to hear with the project, and a separate DI track
with which you can further experiment at any time with DAW plug-ins and/or re-amp-
ing (see the next section).
Re-amping Through HX Stomp
Now let's take the dry DI guitar track we recorded and route it back through HX Stomp
for processing.
16B Pastor of Muppets
Harmony Delay
FeedbkTime
37%
Mix
35%1/8
Dry DI Guitar
USB
Out 5/6
USB
In 1/2
Re-amped Guitar
TRACK 1 (Dry DI Guitar)
TRACK 2 (Processed Guitar)
TRACK 3 (Re-amped Guitar)
L/MONO RIGHT
OUTPUT BAL/UNBAL
USB
1. From Play view, turn the Upper Knob to select the Input block
and then turn the Lower Knob to choose "Input USB 5/6."
You'll see that a small USB icon has replaced the Input block:
INPUT MAIN L/R INPUT USB 5/6
2. In your DAW software, set the DI track's Output setting to HX
Stomp USB 5/6.