User Manual

Global Settings > EXP Pedals

Page Knob Parameter Description

1 EXP 1 Position

Determines whether each expression pedal position is recalled per snapshot, per preset, or applied globally. If you want a Volume Pedal or Wah to

maintain its position when switching presets, set this to "Global."

2 EXP 2 Position

Global Settings > MIDI/Tempo

Page Knob Parameter Description

MIDI Base

Channel

Sets the system base MIDI channel that HX Stomp uses for both receiving and sending MIDI communication via MIDI and USB.

2 MIDI Thru

When on, MIDI OUT also acts as a MIDI THRU; that is, it passes through any MIDI messages received at the MIDI IN jack.

3 Rx MIDI Clock

DetermineswhetherHXStomprespondstoincomingMIDIbeatclockreceivedatitsMIDIINport,viaUSB,orwhicheveritsensesrst("Auto").If

youdon'twantHXStomptorespondtoMIDIclockatall,setthisto"O."

1 Tx MIDI Clock

Determines whether HX Stomp transmits MIDI beat clock from its MIDI OUT port, via USB, or both. If you don't want HX Stomp to transmit MIDI

clockatall,setthisto"O."

2 Tempo Select

Choose whether the tempo is stored and recalled with each snapshot, recalled with each preset, or is applied globally across all presets and snap-

shots.

3 BPM

Depending on the Knob 2 (Tempo Select) setting, this Beats Per Minute tempo value is saved per snapshot, per preset, or globally.

1 USB MIDI

When on, HX Stomp receives and transmits MIDI data via USB in the same capacity as its MIDI jacks.

2 MIDI PC Rx

Determines whether or HX Stomp responds to incoming MIDI program change (PC) messages from its MIDI IN port, via USB, or both MIDI and

USB.Ifyoudon'twantHXStomptorespondtoPCmessagesatall,setthisto"O."

3 MIDI PC Tx

Determines whether HX Stomp automatically sends MIDI program change (PC) messages from its MIDI OUT port, via USB, or both MIDI and USB

when selecting presets.

Global Settings > Displays

Knob Parameter Description

1 LED Rings

DetermineswhethertheStompmodefootswitches'coloredLEDringsappeardimwhenbypassed("Dim/Brt"),orowhenbypassed("O/Brt").When

playinginbrightsunlight,youmaywanttosettothisto"O/Brt"toincreasecontrast.

2 Tap LED

Ifyou'dprefertonotseetheredTAPLEDconstantlyashing,youcanturnito.