User Manual

42
Global Settings > Footswitches
Page Knob Parameter Description
1
1 Stomp Select
When set to "Touch," touching a Stomp mode switch selects its assigned item(s) but pressing doesn't. When set to "Press," pressing a Stomp
mode switch selects its assigned item(s) but touching doesn't (helpful if you insist on playing barefoot). When set to "Both," either touching or
pressing will select the assigned item. The default is "Touch."
2 FS3 Function
Sets the function of Footswitch 3. Choose from TAP/Tuner, Stomp 3, Preset Up, Preset Down, Snapshot Up, Snapshot Down, All Bypass, or
Toggle EXP 1/2. The default is TAP/Tuner.
3 FS4 Function
Sets the function of Footswitch 4, but only when Global Settings > Preferences > EXP/FS Tip is set to "FS4." (It's set to "EXP 1" by default, so you
must change this to "FS4" for FS4 Function to work properly!) Choose from TAP/Tuner, Stomp 4, Bank Up, Bank Down, Preset Up, Preset Down,
Snapshot Up, Snapshot Down, Next Footswitch Mode (same as pressing PAGE from Play view), Previous Footswitch Mode (same as pressing
from Play view), All Bypass, or Toggle EXP 1/2.* The default is "All Bypass."
2 1 FS5 Function
Sets the function of Footswitch 5, but only when Global Settings > Preferences > EXP/FS Ring is set to "FS5." Choose from TAP/Tuner, Stomp 5,
Bank Up, Bank Down, Preset Up, Preset Down, Snapshot Up, Snapshot Down, Next Footswitch Mode (same as pressing PAGE from Play view),
Previous Footswitch Mode (same as pressing from Play view), All Bypass, or Toggle EXP 1/2.* The default is "ToglEXP[1/2]."
*For connecting an external footswitch to access the FS4 or FS5 functions, the use of a momentary (unlatched) type footswitch is recommended.
Mission Helix Expression Pedal
By default, the HX Stomp EXP 1/2 | FS4/5 jack is set
up to accommodate the Mission Helix expression pedal,
connected via an optional Y cable (sometimes called
a TRS insert cable). The main advantage of this setup
is that pressing the integrated toe switch will not only
toggle the pedal's function between EXP 1 (Wah/Pitch
Wham) and EXP 2 (Volume Pedal/Pan), but it will also
toggletheappropriateblocksonando.
TIP (EXP 1)
RING (FS5)
TRS
One Expression Pedal
When connecting one traditional expression pedal, there
are a few things to be aware of:
• From the "Controller Assign" menu, assign the
Position parameter of Volume Pedal and Pan
blocks to "EXP 1"
• From the "Bypass Assign" menu, assign the
Switch parameter of Volume Pedal and Pan
blocks to "None"
• From the "Bypass Assign" menu, assign the
Switch parameter of Wah and Pitch Wham
blocks to either "EXP 1" (where HX Stomp
engages the block when moving EXP 1 away
from its heel down position) or a stomp foot-
switch
TIP (EXP 1)
Two Expression Pedals
When connecting two traditional expression pedals with
a Y cable, there are a few things to be aware of:
• Set "Global Settings > Preferences" > EXP/FS
Ring to "EXP 2"
• From the "Bypass Assign" menu, assign the
Switch parameter of Volume Pedal and Pan
blocks to "None"
• From the "Bypass Assign" menu, assign the
Switch parameter of Wah and Pitch Wham
blocks to either "EXP 1" (where HX Stomp
engages the block when moving EXP 1 away
from its heel down position) or a stomp foot-
switch
TIP (EXP 1) RING (EXP 2)