User Manual

33
SHORTCUT: Hold ACTION and press a parameter knob to quickly remove
any controller assignment (including the Snapshots controller). The value
appears in color, indicating no controller is assigned to it.
NOTE: You can also manually assign the Snapshots controller. From the
"Controller Assign" page, select the desired block and parameter and
turn Knob 2 (Controller) to select "Snapshot."
4. Switch back to the snapshot you started with.
HX Stomp instantly and seamlessly returns to its previous state.
NOTE: If you've changed "Global Settings > Preferences" > Snapshot Edits
to"Discard,"youmustsavethepresetbeforeselectingadierentsnapshot;
otherwise any edits will be discarded!
Copying/Pasting a Snapshot
Instead of creating a new snapshot from scratch, you may want to copy an existing
one to another snapshot location and tweak just a few things.
1. From Snapshot mode, while touch-holding the footswitch for
the snapshot you want to copy, briey touch and release the
footswitch for the snapshot you want to overwrite.
A dialog panel appears:
OKCancel
Copy Snap 1 to 2?
2. Press Knob 3 (OK).
Swapping Snapshots
1. From Snapshot mode, simultaneously touch-hold the two
footswitches for the snapshots you wish to swap until the fol-
lowing dialog appears:
OKCancel
Swap Snaps 1 and 2?
2. Press Knob 3 (OK).
Saving Snapshots
Press and ACTION together twice to save the preset.
Saving a preset stores all of its 3 snapshots automatically.
NOTE: Selecting a preset recalls the snapshot that was active when the preset
was saved.
Determining Snapshot Edit Behavior
Say you’re on Snapshot 1 (verse) and you change a few things—switch a delay block
on,switchamodblocko,tweakadistortion’sDriveparameter,etc.Ifyouswitchto
Snapshot 2 (chorus) and then back to Snapshot 1 for the second verse, should HX
Stomp recall those changes or return Snapshot 1 to its state when the preset was last
saved? There’s no right answer, therefore, HX Stomp lets you choose.
1. Press PAGE and PAGE together to open the Menu.
2. Press PAGE and then press Knob 2 (Global Settings).
3. Turn the Upper Knob to select the Preferences submenu.
4. Turn the Snapshot Edits knob to set snapshot edit behavior:
• Recall—Any snapshot edits are recalled when jumping from snapshot to
snapshot, and appear as you last left them (the default).
• Discard—Any snapshot edits are discarded when jumping from snapshot to
snapshot, and appear as the preset was last saved. If you want to save chang-
es made to the current snapshot while Snapshot Edits is set to “Discard,”
press the and ACTION buttons together twice to save before selecting
another snapshot.
The camera icon on the Play screen shows you the Snapshot Edits setting at a glance—
When set to “Recall,” the camera is gray; when set to “Discard,” the camera is red:
1
1
RECALL DISCARD
NOTE:Don'tforgettosavebeforechangingtoadierentpresettostoreallyour
snapshot settings!