User Manual

27
Mic Models
Model Based On*
57 Dynamic
Shure
®
SM57
409 Dynamic
Sennheiser
®
MD409
421 Dynamic
Sennheiser
®
MD 421-U
30 Dynamic
Heil Sound
®
PR 30
20 Dynamic
Electro-Voice
®
RE20
121 Ribbon
Royer
®
R-121
160 Ribbon
Beyerdynamic
®
M 160
4038 Ribbon
Coles 4038
414 Cond
AKG
®
C414 TLII
84 Cond
Neumann
®
KM84
67 Cond
Neumann
®
U67
87 Cond
Neumann
®
U87
47 Cond
Neumann
®
U47
112 Dynamic
AKG
®
D112
12 Dynamic
AKG
®
D12
7 Dynamic
Shure
®
SM7
Cab Settings
Knob Parameter Description
1 Mic
Selects one of the 16 available mic models.
2 Distanc
Sets the distance (1 inch to 12 inches) between the mic and
the speaker grille.
3 Low Cut
Filters a portion of the cab's bass and/or treble frequencies,
which can help remove rumble and/or high-end harshness.
4 High Cut
5 Reec
Setstheamountof"earlyreections."Highervaluesaddmore
reectiveroomsoundtoyourAmptone.
6 Level
Adjusts the overall output level of the Cab.
Impulse Response (IR)
Impulse Responses are mathematical functions representing the sonic measurements
ofspecicaudiosystems(forHXStomp,acousticguitarbodyresonanceorspeak-
er cabinet and microphone combinations). HX Stomp can load and store up to 128
custom or third-party IRs at a time.
Loading Custom IRs
Loading custom impulse responses requires connecting to the HX Edit software in
your Mac or Windows computer. The HX Edit application is available as a free down-
load from line6.com/software.
1. Connect HX Stomp to your computer via USB and open the HX
Edit application.
2. Click the Impulses tab.
3. Drag one or more IR les from the desktop or any Finder win-
dow directly into the HX Edit app's Impulses list.
HX Edit updates the HX Stomp hardware's IR list automatically. HX Stomp can
load and store up to 128 IRs at a time. 48kHz, 16-bit, mono, .WAV type IRs of
up to 2,048 samples are natively supported; however, HX Edit lets you import IR
.WAVlesofdierentsamplerate,bitdepth,lengthandstereoformat,andthe
app will convert these attributes automatically before sending to HX Stomp.
• Go to the HX Edit app's Preferences to set the preferred behavior for import-
ing Stereo WAV IRs - there you can choose to import the left or right channel
dataofthele,oramixofbothchannelsforthe(mono)IR.
• The imported IR is automatically shortened (or lengthened) to 2,048 samples.
You may optionally choose a 1,024-sample version from the model list to
save DSP, which fades out the IR halfway through.
IMPORTANT! IR blocks reference an IR index number, not the actual IR
le.Forexample,ifyouhappentoreplaceorclear "IR 12" from the HX
Editapplication,itwillaectanypresetscontainingIRblockswith"IR12"
selected.
*See "U.S. Registered Trademarks" on page 31.AllproductnamesusedinthisdocumentaretrademarksoftheirrespectiveownersandneitherYamahaGuitarGroupnorLine6areassociatedoraliatedwiththem.
These trademarks appear solely to identify products whose tones and sounds were studied by Line 6 during sound model development.