Manual

39
Copying and Pasting a Command
1. Select the location containing the command you wish to copy
and press ACTION.
2. Press Knob 1 (Copy Command).
3. Select the location to which you want to paste the command—
even in a dierent preset—and press ACTION.
4. Press Knob 3 (Paste Command).
Copying and Pasting All Commands
Setting up the same or similar set of commands across multiple presets can quickly
become tiresome. Fortunately, Helix lets you quickly copy and paste all commands to
another preset.
1. From the Command Center page, press ACTION.
2. Press Knob 2 (Copy All Commands).
3. Select the preset to which you want to paste the commands
and press ACTION.
4. Press Knob 3 (Paste All Commands).
Clearing a Command
1. Select the location containing the command you want to clear
and press ACTION.
2. Press Knob 4 (Clear Command).
Clearing All Commands
1. From the Command Center page, press ACTION.
2. Press Knob 5 (Clear All Commands).
The following dialog appears:
OKCancel
Clear all Command Center assignments?
3. Press Knob 6 (OK).
Customizing a Command Footswitch Label
1. From the Command Center screen, select Footswitch 1-5,
7-11, or Exp Toe with a command assigned and press Knob 6
(Customize).
The Customize screen appears:
16B Dream Rig+Vocals
Cancel Delete Clear
Customize
OK
9
!
“
#
7
8
Remove Switch LED
Auto Color
Move the joystick left or right to move the cursor.
Turn the joystick (or move it up/down) to change the selected character.
Press Knob 2 (Delete) to delete the selected character and shift all following
characters to the left.
Press Knob 3 (Clear) to clear the selected character.
SHORTCUT: Press the joystick to cycle through A, a, and 0.
Press Knob 4 (Remove) to remove the custom label, after which the foot-
switch displays its normal assignment.
2. Press Knob 6 (OK).
NOTE: Footswitches can also be customized from the "Footswitch Assign"
screen.
Customizing a Command Footswitch Color
1. From the Customize screen, turn Knob 5 (Switch LED) to select
the desired color (or turn it o).
Normally, you should leave this set to "Auto Color."
2. Press Knob 1 (Cancel) or to exit.