Manual

33
5. Turn Knob 2 (Type) to select "Momentary" or "Latching."
Momentary
The block is bypassed (or enabled, if already bypassed) for as
long as you hold the switch.
Latching
The block is bypassed (or enabled, if already bypassed) every time
you press the switch. This is the default.
NOTE: Footswitch type (momentary or latching) is determined per foot-
switch, not per assignment.
Customizing a Footswitch Label
1. From the Footswitch Assign screen, select Footswitch 1-5,
7-11, or Exp Toe and press Knob 6 (Customize).
The Customize screen appears:
16B Dream Rig+Vocals
Cancel Delete Clear
Customize
OK
9
!
“
#
7
8
Remove Switch LED
Auto Color
Move the joystick left or right to move the cursor.
Turn the joystick (or move it up/down) to change the selected character.
Press Knob 2 (Delete) to delete the selected character and shift all following
characters to the left.
Press Knob 3 (Clear) to clear the selected character.
SHORTCUT: Press the joystick to cycle through A, a, and 0.
Press Knob 4 (Remove) to remove the custom label, after which the foot-
switch label displays its normal assignment.
2. Press Knob 6 (OK).
NOTE: Footswitches can also be customized from the "Command Center"
screen.
Customizing a Footswitch Color
1. From the Customize screen, turn Knob 5 (Switch LED) to select
the desired color (or turn it o).
Normally, you should leave this set to "Auto Color."
2. Press Knob 1 (Cancel) or to exit.