User Manual
Table Of Contents
- Helix LT 2.10 Owner's Manual
- Contents
- Welcome to Helix LT
- Quick Start
- Setting Proper Output Levels
- Selecting Presets and Setlists
- Preset Footswitch Mode
- Stomp Footswitch Mode
- Snapshot Footswitch Mode
- Looper Footswitch Mode
- Pedal Edit Mode
- Selecting Blocks/Adjusting Parameters
- Bypassing a Block
- Choosing a Block's Model
- Choosing an Input
- Choosing an Output
- Moving Blocks
- Copying and Pasting a Block
- Clearing a Block
- Clearing All Blocks
- Saving/Naming a Preset
- Serial vs. Parallel Routing
- Removing Parallel Path B
- Moving Split & Merge Blocks for More Parallel Routings
- Dynamic DSP
- Block Order and Stereo Imaging
- What is Variax?
- The Blocks
- Tuner
- Snapshots
- Bypass Assign
- Controller Assign
- Command Center
- Global EQ
- Global Settings
- USB Audio
- MIDI
51
Global Settings
The Global Settings menu contains additional parameters that apply to all setlists and
presets, such as input and output levels, custom footswitch mode settings, etc. The
upper right corner displays the currentrmwareversion.Visitline6.com/support for
information on the latest Helix LTrmwareupdates.
1. Press to open the Menu.
2. Press Knob 6 (Global Settings).
The Global Settings screen appears:
Ins/Outs
MIDI/Tempo
Displays
Footswitches
Global Settings
Preferences
EXP Pedals
Firmware Version 2.10.0
1/4”
Outputs
InstrumentLineLine
Off
Send/
Return 1
XLR
Outputs
Guitar In
Pad
Ins/Outs
0.0dBInstrument
USB In 1/2
Trim
Send/
Return 2
Ins/Outs
3. Move the joystick to select one of the six submenus.
If necessary, press <PAGE/PAGE> to view more parameters.
Resetting All Global Settings
Resetting the Global Settings returns them to factory default. Performing this reset
doesnotaectanypresetsyoumayhavecreated.
1. From any Global Settings submenu, press ACTION.
2. Press Knob 1 (Factory Settings).
The following dialog appears:
OKCancel
Restore Global Settings to factory defaults?
3. Press Knob 6 (OK).