User Manual
Table Of Contents
- Helix LT 2.10 Owner's Manual
- Contents
- Welcome to Helix LT
- Quick Start
- Setting Proper Output Levels
- Selecting Presets and Setlists
- Preset Footswitch Mode
- Stomp Footswitch Mode
- Snapshot Footswitch Mode
- Looper Footswitch Mode
- Pedal Edit Mode
- Selecting Blocks/Adjusting Parameters
- Bypassing a Block
- Choosing a Block's Model
- Choosing an Input
- Choosing an Output
- Moving Blocks
- Copying and Pasting a Block
- Clearing a Block
- Clearing All Blocks
- Saving/Naming a Preset
- Serial vs. Parallel Routing
- Removing Parallel Path B
- Moving Split & Merge Blocks for More Parallel Routings
- Dynamic DSP
- Block Order and Stereo Imaging
- What is Variax?
- The Blocks
- Tuner
- Snapshots
- Bypass Assign
- Controller Assign
- Command Center
- Global EQ
- Global Settings
- USB Audio
- MIDI
50
Global EQ
GlobalEQhasthreefullyparametricbandsplusvariablelowandhighcutlters,andis
used for compensating for the wide disparity in acoustic environments on tour or when
traveling from studio to studio. Global EQ is applied to all setlists and presets, and can
be heard from the 1/4" outputs, XLR outputs, or both.
NOTE: Global EQ is never heard from Send, Digital, or USB outputs.
When Global EQ is active, the Home screen shows the Global EQ icon to the left of
the snapshots icon:
1
1. Press to open the Menu.
2. Press Knob 5 (Global EQ).
The Global EQ screen appears:
Mid Gain
0.0 dB
Mid QMid Freq
2.5 kHz
5.0
Low Freq
180 Hz
Low Q
5.0
Low Gain
0.0 dB
Press BYPASS to turn Global EQ on/off
Global EQ
3. Press BYPASS to turn Global EQ on and o.
SHORTCUT: From the Home screen, press and hold BYPASS to turn Global EQ
onandowithouthavingtonavigatetotheGlobalEQpage.
TIP: Press PAGE> to view and turn Knob 1 (Apply EQ) to set whether
Global EQ is applied to only the 1/4" outputs, only the XLR outputs, or both.
Resetting Global EQ
ResettingtheGlobalEQreturnsitssettingstofactorydefault(at).
1. From the Global EQ screen, press ACTION.
2. Press Knob 1 (Reset Global EQ).
The following dialog appears:
OKCancel
Reset Global EQ?
3. Press Knob 6 (OK).