User Manual
Table Of Contents
- Helix LT 2.10 Owner's Manual
- Contents
- Welcome to Helix LT
- Quick Start
- Setting Proper Output Levels
- Selecting Presets and Setlists
- Preset Footswitch Mode
- Stomp Footswitch Mode
- Snapshot Footswitch Mode
- Looper Footswitch Mode
- Pedal Edit Mode
- Selecting Blocks/Adjusting Parameters
- Bypassing a Block
- Choosing a Block's Model
- Choosing an Input
- Choosing an Output
- Moving Blocks
- Copying and Pasting a Block
- Clearing a Block
- Clearing All Blocks
- Saving/Naming a Preset
- Serial vs. Parallel Routing
- Removing Parallel Path B
- Moving Split & Merge Blocks for More Parallel Routings
- Dynamic DSP
- Block Order and Stereo Imaging
- What is Variax?
- The Blocks
- Tuner
- Snapshots
- Bypass Assign
- Controller Assign
- Command Center
- Global EQ
- Global Settings
- USB Audio
- MIDI
39
SHORTCUT:PressthejoysticktocyclethroughA,a,0,and[SPACE].
Press Knob 4 (Remove) to remove the custom name. Remove is grayed out
until a custom name is applied.
3. Press Knob 6 (OK).
Snapshot names are only retained if you save the preset. See below.
Customizing a Snapshot Color
1. From the Rename Snapshot screen, turn Knob 5 (Switch LED)
to select the desired color.
Normally, you should leave this set to "Auto Color."
2. Press Knob 1 (Cancel) or to exit.
Saving Snapshots
Press SAVE twice to save the preset.
Saving a preset stores all of its 8 snapshots automatically.
NOTE: Selecting a preset recalls the Snapshot that was active when the preset
was saved.
Determining Snapshot Edit Behavior
Say you’re on Snapshot 2 (VERSE) and you change a few things—switch a delay block
on,switchamodblocko,tweakanAmp’sGainparameterfromyourVariax’sTone
knob, etc. If you switch to Snapshot 4 (CHORUS) and then back to Snapshot 2 for the
second verse, should Helix LT recall those changes or return Snapshot 2 to its state
when the preset was last saved? There’s no right answer, therefore, Helix LT lets you
choose.
1. Press and then Knob 6 (Global Settings).
2. Move the joystick to select the Preferences submenu.
Ins/Outs
MIDI/Tempo
Displays
Footswitches
Global Settings
Preferences
EXP Pedals
Firmware Version 2.10.0
Preferences
01A-32D
Preset
Numbering
EXP 2
EXP 2/
EXT AMP
Authentic
Tap Tempo
Pitch
Snapshot
Edits
Recall
Preferences
3. Turn Knob 1 (Snapshot Edits) to set snapshot edit behavior:
• Recall—Any snapshot edits are recalled when jumping from snapshot to snap-
shot, and appear as you last left them (the default).
• Discard—Any snapshot edits are discarded when jumping from snapshot to
snapshot, and appear as the preset was last saved. If you want to save chang-
es made to a snapshot while Snapshot Edits is set to “Discard,” press SAVE
twice before selecting another snapshot
The camera icon on the home screen shows you the Snapshot Edits setting at a
glance—When set to “Recall,” the camera is gray; when set to “Discard,” the camera
is red.
1
1
SHORTCUT: At any time, hold BYPASS and press SAVE to toggle this setting.