User Manual
Table Of Contents
- Helix LT 2.10 Owner's Manual
- Contents
- Welcome to Helix LT
- Quick Start
- Setting Proper Output Levels
- Selecting Presets and Setlists
- Preset Footswitch Mode
- Stomp Footswitch Mode
- Snapshot Footswitch Mode
- Looper Footswitch Mode
- Pedal Edit Mode
- Selecting Blocks/Adjusting Parameters
- Bypassing a Block
- Choosing a Block's Model
- Choosing an Input
- Choosing an Output
- Moving Blocks
- Copying and Pasting a Block
- Clearing a Block
- Clearing All Blocks
- Saving/Naming a Preset
- Serial vs. Parallel Routing
- Removing Parallel Path B
- Moving Split & Merge Blocks for More Parallel Routings
- Dynamic DSP
- Block Order and Stereo Imaging
- What is Variax?
- The Blocks
- Tuner
- Snapshots
- Bypass Assign
- Controller Assign
- Command Center
- Global EQ
- Global Settings
- USB Audio
- MIDI
31
Impulse Response Settings
Knob Parameter Description
1 IR Select
Selects one of the 128 available IR locations. If a location con-
tains an IR, the inspector header displays its name; otherwise,
it reads "<EMPTY>."
2 Low Cut
Filters a portion of the IR's bass and/or treble frequencies,
which can help remove rumble and/or high-end harshness.
3 High Cut
4 Mix
Blends the IR signal with the dry signal passed through the IR
block. When set to 0%, the path bypasses the IR completely.
When set to 100%, the entire path is fed through the IR, and
no dry signal is heard.
5 Level
Adjusts the overall output level of the IR block.
Send/Return
Each of the sends and returns can be used independently, or used together as an FX
loop.
FXloopsletyoudynamicallyinsertyourfavoriteexternalstompboxes(orrackeects)
into any location in your tone.
NOTE: Each send and return pair can be set for instrument (for inserting stomp-
boxes) or line-level operation. See "Global Settings > Ins/Outs"
NOTE: Each return can be used only once in a preset. For example, if you add
a Return 1 block (or assign one of the input blocks to Return 1), Return 1/2, FX
Loop 1, and FX Loop 1/2 items will all appear grayed out in the model list, as they
also utilize Return 1.
Send Settings
Knob Parameter Description
1 Send
Adjusts the level sent to your external devices.
2 Dry Thru
Adjusts the level of the signal passed through the Send block,
independent of the Knob 1 (Send) level. Normally, this should
be set to 0.0dB.
Return Settings
Knob Parameter Description
1 Return
Adjusts the level received at the Return jack.
2 Dry Thru
Adjusts the level of the signal passed through the Return block,
independent of the Knob 1 (Return) level. Normally, this should
be set to 0.0dB.
Knob Parameter Description
1 Return
Adjusts the level received at the Return jack.
2 Mix
Blends the Return signal vs. the dry signal passed through the
Return block. When set to 0%, the path bypasses the Return
completely. When set to 100%, the entire signal is fed from the
Return, and no dry thru signal is heard.
FX Loop Settings
Knob Parameter Description
1 Send
Adjusts the level sent to your external device.
2 Return
Adjusts the level received at the Return jack.
3 Mix
Blends the FX loop signal vs. the dry signal passed through
the FX Loop block. When set to 0%, the path bypasses the
FX loop completely. When set to 100%, the entire path is fed
through the FX loop, and no dry thru signal is heard.
4 Trails
Trails O: An external stompbox would be instantly muted
when the FX Loop block is bypassed. Trails On: An external
delay or reverb stompbox would continue to decay naturally
whentheFXLoopblockisbypassedoradierentsnapshotis
selected.