User Manual
Basic Operation
1
2
5
3
4
1. Volume - Adjusts the signal level output of your guitar.
2. Tone - Adjusts the amount of high frequency pass through.
3. Guitar Model Selector - Push in this knob (LED is lit) to access any of
the 10 Variax guitar model banks, or one of two user denable custom
model banks.
When in Variax mode, the Guitar Model Selector LED will illuminate
the active guitar model bank. There are 5 models per bank, as dened
by the Pickup Selector Switch position. Press this knob again (LED
is not lit) to use the magnetic pickups.
4. Alternate Tuning - When in Variax mode you can use the Alternate
Tuning Knob to instantly access 10 pre-loaded alternate tunings on
the y. Missing your favorite tuning? No problem! You can store your
own custom tunings here as well. More on that later. Be sure you
amplify your signal enough to drown out the natural acoustics of your
guitar or you might hear some odd modulations from it blending with
the amplied sound.
When set to MODEL your Variax
®
guitar’s tuning is determined by
the current guitar model and Selector Switch position. To see this
in action, enter Variax mode and select the CUSTOM 2 model bank,
which is the only bank pre-loaded with alternate tunings from the factory.
Now toggle your selector switch to preview the tunings pre-loaded
with each model. You can assign alternate tunings to any guitar in the
Guitar Model Selector banks using the Line 6 Variax Workbench
HD software (see the Variax Workbench HD Application section).