® SPIDER V FAMILY SPIDER V 30 SPIDER V 60 SPIDER V 120 SPIDER V 240 SPIDER V 240HC 40-00-0454 Rev F PILOT’S GUIDE www.line6.com/manuals © 2018 Yamaha Guitar Group, Inc. All rights reserved.
SPIDER V COMPARISON CHART Features 2 SPIDER V 30 SPIDER V 60 SPIDER V 120 SPIDER V 240 SPIDER V 240HC Amp Models 78 78 78 78 78 Cabinet Models 23 23 23 23 23 Effect Models 101 101 101 101 101 Amplifier Wattage 30 watts 60 watts 120 watts 240 watts (120 w/per side) 240 watts (120 w/per side) Mono/Stereo Mono Mono Mono Stereo Stereo Speaker Size 1 x 8" 4Ω 1 x 10" 4Ω 1 x 12" 4Ω 2 x 12" 4Ω 2 x 4" 16Ω Tweeter Configuration 1 1 1 2 2 XLR Direct Outs No No Yes Y
Overview Spider V Remote App Welcome to the SPIDER V Family Pilot’s Guide. This guide contains basic details of the Spider V amplifier's features and functionality. Line 6® Spider V amplifiers utilize amp modeling technology to emulate the sound of one or more specific models of guitar amplifiers. They also include built-in effects used to change or enhance the sound of the amplified guitar signal. Here's an overview of the features built into the Spider V amplifiers.
Front Panel Controls 1 3 1. INPUT Jack – Plug in your guitar here. A Relay G10T* transmitter can be synced and recharged by inserting it into the input jack. 2. AMP and FX Buttons – Press either the AMP or FX button to select what you want to edit with the knobs. When set to amp, the knobs control the amp model parameters. When set to FX, the knobs control the Smart FX. 3.
Rear Panel Connections 13 14 15 16 17 18 19 13. POWER Switch – Turns the amplifier on/off. 14. AC IN – The included power cable connects here. See the rear panel markings for electrical information. 15. iPhone / iPod USB A Port – Connect an iOS device here using a standard Lightning cable and use the Spider V Remote mobile app to edit tones, update, and playback & record audio. This port will power your device. DO NOT connect any non-iOS device to this port. 16.
How To: Change Presets 1. Press the HOME BUTTON at any time to return to the Home Screen. The Home Screen displays the preset name and location. 2. Turn the SELECT KNOB below the LCD screen to cycle through the list of presets. Save a Preset 1. Press and hold the SELECT KNOB until the Save Screen appears. 2. Turn the SELECT KNOB to select characters for editing the preset name. 3. Press the SELECT KNOB to highlight the character. 4. Turn the SELECT KNOB to change character.
Using the Quick Looper* To enter Quick Looper Mode, press the QUICK LOOP BUTTON. To Record a Loop: 1. To begin recording, press the QUICK LOOP BUTTON to set the loop start. 2. To stop recording and start playback, press the QUICK LOOP BUTTON to set the loop end. 3. Double-press the QUICK LOOP BUTTON to stop playback. To Overdub: 1. When the loop is in playback press the QUICK LOOP BUTTON to set the overdub start point. 2. Press the QUICK LOOP BUTTON to end overdub and start playback. 3.
Charge and Sync a Relay G10T Wireless Transmitter Using a Foot Controller with Spider V The Line 6 Relay G10T wireless transmitter is the perfect accessory to go with your wireless-ready Spider V amp—making it easier than ever to take your performance wireless.* The G10T will automatically charge and pair itself with your amp. You get up to 8 hours of playing per charge, with up to 200 hours of standby time. Simply plug the transmitter into your guitar and start playing.
3. The up and down arrows change banks incrementally. 4. The FUNCTION button controls the onboard looper. Press once to record, once again to play, and again to overdub. Double-press it to stop, and press and hold to erase the loop (when stopped). 5. The LCD displays the currently selected preset, and temporarily displays the preset within the new bank, as well as shows an effect that has been bypassed or enabled. 6. Use the treadle to control the volume of the guitar signal. 7.
Global Settings and Wireless Channel Selection 1. Press and hold the HOME BUTTON to enter the Global Settings screen. 2. Turn the SELECT KNOB to scroll through the settings. 3. Press the SELECT KNOB to select a setting. 4. Turn the SELECT KNOB to modify the setting. 5. Press the SELECT KNOB again to return to scrolling the list. 6. Press the HOME BUTTON to exit. GLOBAL SETTINGS OPTIONS ITEM VALUES DESCRIPTION Spider V 2.00.
Using External Speaker Cabinets with Spider V 240HC 8 OHM STEREO SPEAKER OUTS USE 4Ω MONO OR 8Ω STEREO USE CLASS 2 WIRING ONLY RIGHT LEFT/MONO 4 OHM MONO SPEAKER OUTS USE 4Ω MONO OR 8Ω STEREO USE CLASS 2 WIRING ONLY RIGHT LEFT/MONO 11
© 2018 Yamaha Guitar Group, Inc. All rights reserved. Line 6, the Line 6 logo, Spider, Relay, and FBV are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions. Apple, iPhone, iPod, Lightning, and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iOS is a trademark of Cisco, registered in the U.S. and other countries.
