User Manual

ManualsBrandsLine6 ManualsCombo for Electric GuitarSpider V 240HC - WIRELESS READY GUITAR HEAD WITH INTEGRATED SPEAKERS 240W

Bypass/Enable Smart FX

1. Press the FX BUTTON to select the FX Layer.

2. Turn the ROTARY KNOB to highlight which eect you wish to

bypass or enable.

3. Press the ROTARY KNOB to bypass or enable the highlighted

eect.

4. Press the HOME BUTTON to exit.

Using the Quick Looper*

To enter Quick Looper Mode, press the Loop button.

To record a loop:

1. To begin recording, press the Loop button to set the loop start.

2. To stop recording and start playback, press the Loop button to set

the loop end.

3. Double-press the Loop button to stop playback.

To overdub:

1. When the loop is in playback press the Loop button to set the

overdub start point.

2. Press the Loop button to end overdub and start playback.

3. Double-press the Loop button to stop playback.

To stop playback, double-press the Loop button.

To erase the loop, press and hold the Loop button to erase the loop

content.

Play Drum Loops

1. Press the PLAY/PAUSE BUTTON to enter the Playback Screen.

2. Look for the Musical Notes icon on the left side. If it is not displayed,

turn the ROTARY KNOB to scroll to the icon on the left and press

to change it to the Musical Notes icon.

3. Use the ROTARY KNOB to highlight the Drum Loop parameters to

select which groove will be played, and control its volume.

4. Press the PLAY/PAUSE BUTTON to start and stop the Drum

Loops.

5. Press the Home button to exit.

Start the Metronome

1. Press the PLAY/PAUSE BUTTON to enter the Playback Screen.

2. Turn the ROTARY KNOB to scroll to the icon on the left and press

the knob to change it to the Metronome icon.

3. Press the PLAY/PAUSE BUTTON to start and stop the metronome.

4. Press the HOME BUTTON to exit.

Play Audition Samples

1. Press on the PLAY/PAUSE BUTTON to enter the Playback Screen.

2. Turn the ROTARY KNOB to scroll to the icon on the left of the

screen. Press the ROTARY KNOB to change it to the Guitar/Tape

icon.

3. Use the ROTARY KNOB to highlight the "Demo Ri" parameter to

select the ri.

4. Press the PLAY/PAUSE BUTTON to start or stop the demo.

5. While the demo ri is playing, you may change presets and make

any changes to amp models and eects.

6. Press the HOME BUTTON to exit.

* Available on select models. Please see the comparison chart on page 3 to see

which features are available on your SPIDER V model.