SPIDER V 20 PILOT’S GUIDE MANUEL DE PILOTAGE PILOTENHANDBUCH MANUAL DEL PILOTO パイロット・ガイド 新手指南 40-00-0395 Rev A Pilot’s Guide also available at www.line6.com/manuals © 2017 Line 6, Inc.
SPIDER V AMPLIFIERS - SPECIFICATIONS Features Amp Models SPIDER V 20 SPIDER V 30 SPIDER V 60 SPIDER V 120 SPIDER V 240 SPIDER V 240HC 78 78 78 78 78 78 Cabinet Models 23 23 23 23 23 23 Effect Models 101 101 101 101 101 101 20 watts 30 watts 60 watts 120 watts 240 watts (120 w/per side) 240 watts (120 w/per side) Mono/Stereo Mono Mono Mono Mono Stereo Stereo Speaker Size 1 x 8" 4Ω 1 x 8" 4Ω 1 x 10" 4Ω 1 x 12" 4Ω 2 x 12" 4Ω 2 x 4" 16Ω None 1 1 1 2 2 No No
Overview Welcome to the SPIDER V 20 Pilot’s Guide. This guide contains descriptions of the Line 6® SPIDER® V 20 amplifier's features and functionality. The SPIDER V 20 amplifier is the fifth generation guitar amp from the SPIDER Family. It features the diverse quality of Line 6 amp modeling in a compact combo form factor. Here’s an overview of some of the new features of the SPIDER V 20 amplifier.
Controls and Connections 2 1 CRUNCH 3 4 6 5 8 7 11 FX CHUNK FX 12 FX INSANE CHIME VIBE CLEAN ACOUSTIC BASS SAVE AMBIENT 9 1. INPUT Jack – Plug in your guitar here. 2. PRESET Encoder – Turn to select one of the 16 available presets. A preset stores the value of each knob, as well as the FX 1, 2 & 3 model types and their bypass states. 3. DRIVE Knob – Drive is like the volume or gain knob on other amps; it controls how much “dirt” or “distortion” you get in your sound. 4.
AC Power The assignable Smart FX types are Dynamics (yellow), Drives (orange), Modulation (blue), Delay (green), and Filter/Pitch/Synth (purple). There are multiple models to choose from for each effect type. You can utilize the Spider V Remote app to change the effect type or model. The amplifier's Power Switch and AC Connector, for use with the included power cable, are located on the rear panel of the amplifier. Please see the amplifier's rear panel markings for electrical information. 1.
Changing Amps and Effects For Android Devices - An Android "On-The-Go" (OTG) Adapter is required for connecting to your Spider V 20 amp's USB port. The Spider V Remote mobile app is available free from the Google Play™ store. To change the model for any amp or effects block, select the block within the Signal Flow, then choose the desired model from the Model Browser.
©2017 Line 6, Inc. All rights reserved. Please Note: Line 6 and Spider are trademarks of Line 6, Inc., registered in the U.S. and other countries. FBV is a trademark of Line 6, Inc. Apple and Mac are trademarks of Apple Inc. registered in the U.S. and other countries. App Store is a service mark of Apple, Inc. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iOS is a trademark of Cisco, registered in the U.S. and other countries.
