User Manual

Loop Recording with Spider Jam
5•4
Turn the • Select knob to select the location you want to save to.
Press • Right on the 4-way button.
If you want to rename the new recording, press • Left/Right on the 4-way button to
pick a character and the Select knob to change that character.
Press • Down on the 4-way button to save, or press the Song, Level, or Tone buttons
to cancel.
Loading Recordings
To load a recording:
Press the • Song / Drums button to show the Song/Drums Page.
Press • Right on the 4-way button to select Rec.
Turn the • Select knob to see the available recordings.
When you get to the one you want, press the • Play button to play the Recording and
remain in the list. Or, press Right on the 4-way button to play the Recording and
exit the list.
Press the • Play / Stop button to stop and start the recording.
Setting the Recorder Playback Level
You can adjust the Master (overall) playback level, as well as the playback levels of the
Guitar track and Mic track:
Press the • Level / Inputs button twice to show the additional functions.
Turn the • Select knob to highlight Recorder Playback, then press Right on the 4-way
button.
Press • Left/Right on the 4-way button to select Master, Guitar, or Mic.
Turn the • Select knob to set the level.