User Manual

Loop Recording with Spider Jam
5•3
begins at beat 1 of the next bar. This will also set the loop start point.
Play or sing.•
Press the • Rec / Overdub button to set the loop end point, loop back to the loop
start point, and immediately begin overdubbing.
Or, press the • Play / Stop button to set the loop end point and loop back to the loop
start point in Play mode.
Or, press the • Play / Stop button twice to stop recording.
Quick Capture
If you’ve got a guitar riff that you want to capture quickly without having to set up the
recorder, press both the Rec and Undo buttons at the same time to force Rec Select to
Guitar, turn off the Song/Drums, and immediately start the recorder. Press Play / Stop to
stop recording.
Undoing the Last Recording
Press the Undo button to erase your last overdub.
Clearing (Erasing) the Current Track
Press and hold the Undo button for 3 seconds to clear (erase) the current recording.
Saving Recordings
When you save a recording, your complete setup is saved, including any recorded audio,
which Song is selected, your levels, Aux setup, Mic FX and guitar tone preset. To save a
recording:
Press the • Save button.
Turn the • Select knob to highlight Save Recording.
Press • Right on the 4-way button.