User Manual

Jamming with Spider Jam
4•4
Setting Guitar Tones with Songs
By default, loading a Song will automatically load a custom-crafted guitar tone, too. You
can choose whether you want a Song to automatically set the guitar tone:
Press the • Song / Drums button twice to show the additional functions.
Turn the • Select knob to highlight Songs Set Guitar Tone.
Press • Right on the 4-way button.
Turn the • Select knob to select On or Off.
Output Routing for RCA Jacks
You can choose what signals are sent to the RCA jacks on the back of the unit:
Press the • Song / Drums button twice to show the additional functions.
Turn the • Select knob to highlight Output Routing.
Press • Right on the 4-way button.
To have everything come out of both Spider Jam’s on-board speakers and the RCA •
jacks, turn the Select knob to select Normal.
To have the Guitar come out of Spider Jam’s 12-inch speaker and everything else •
come out of the RCA jacks, turn the Select knob to select Performance.
Setting the FBV Mode
Plugging in an optional Line 6 FBV foot controller lets you control Spider Jam with your
feet. There are two FBV Modes of operation. Normal Mode allows you to use your FBV for
User bank and channel switching, while Jam Control Model gives you access to Transport
Controls and Song selection. Depending on which FBV you choose, both modes give you
access to effects on/off, distortion boost on/off, wah/volume pedals, and tap tempo for
delays. A summary is below (not all functions are available from all FBVs):