User Manual

Spider Jam the Amp
3•5
Microphone Trim Knob
The first step after connecting a microphone is to set this knob:
Sing into your microphone at maximum volume and turn this knob until the • Clip
light starts to light slightly.
Turn the knob back down slightly so clipping won’t occur.•
Microphone, Aux, and CD/MP3 Input Levels
Before using the Mic, Aux and CD/MP3 inputs, set their levels as follows:
Press the • Level / Inputs button to show the Levels Page.
Press • Left/Right on the 4-way button to select Mic, Aux, or CD.
Sing or play into the selected input and observe the readings on the meter.•
Turn the • Select knob up or down until the meter shows a peak reading between -20
and 0 when you’re singing or playing.
Tip: Start by turning the Select knob until you see +0 dB (as shown above) on the
screen. Then, turn whatever is connected to Spider Jam up or down to get a peak
meter reading between -20 and 0. If you can’t get there from the other unit, use the
Select knob as described above.