User Manual

Spider Jam the Amp
3•3
Aux Input Assign
The Aux input can be used for a second guitar or any other audio source. This input can
either share the Amp and FX processing with the Guitar input, or share the Microphone
input’s EQ, Reverb, Delay and Compressor FX. You get to decide. If you’re connecting a
second guitar, you’ll want to share the Guitar processing. For just about everything else,
you’ll want to share the Microphone processing. Here’s how you make that choice:
Hold the • Record Select button for two seconds.
Turn the • Select knob to select Mixed with Microphone or Mixed with Guitar.
Press the • Song / Drums, Level / Inputs or Tone/Settings button to exit.
Guitar Noise Gate
Spider Jam includes a built-in Noise Gate, which helps to cut down on hiss and noise.
Here’s how you turn it on and off:
Press the • Tone / Settings button twice to show additional functions.
Turn the • Select knob to highlight Guitar Gate.
Press • Right on the 4-way button.
Turn the • Select knob to turn the Noise Gate on or off.
This setting is stored and recalled with presets.