User Manual

Controls & Connections
2•2
7
Tone Controls – Drive is like the volume or gain knob on other amps; controls
how much “dirt” you get in your sound. Bass, Mid, and Treble controls are customized
for each Amp Model to give you optimal tonal control. When you turn any of these knobs,
the Display will briefly show the currently-loaded Amp Model name, along with the
current settings of the Drive, Bass, Mid, Treble, and Chan Vol knobs.
8
Channel Volume – This control helps you balance the volumes of different
amp-and-effect setups that you store in your Spider Jam’s (36) User preset channels. When
you turn this knob, the Display will briefly show the currently-loaded Amp Model name,
along with the current settings of the Drive, Bass, Mid, Treble, and Chan Vol knobs.
9
Smart Control FX – Spin one of these knobs to get great FX, fast and easy:
Knob A picks Chorus/Flange, Phaser or Tremolo, with a range of settings – from subtle to
extreme – for each effect. The LED shows the active effect. Turning the knob all the way
down turns this effect off.
Knob B picks Delay, Tape Echo or Sweep echo, with a range of mix settings from low to
high. The LED shows the active effect and thje Ta p LED flashes the delay time. To change
the delay time, tap the Ta p button. Turning this knob all the way down turns the effect
off.
When you turn either knob, Display will briefly show you the current settings.
10
Reverb – Dial up more or less virtual room. While turning the knob, the Display
will show you the current setting.