User Manual

6
+
+
Powercab 112 Plus & 212 Plus - Top Panel Controls
1
2
4
3 5
7
6
STEREO ACTIVE GUITAR SPEAKER SYSTEM
1 2
1. VOLUME Knob - Controls the output level of the power amp to
the speaker system� Center position is 6dB down from maximum
output�
2. Signal LEDs - Indicate the overall level of the sound as it is processed
through the system� Green indicates the presence of an input signal,
yellow indicates that it is approaching the upper limit, and red
indicates clipping� If you encounter clipping, try turning down the
level of the source device (e�g�, your amp modeling device)� When
the signal LED(s) turn yellow, the Powercab speaker system will have
the most realistic non-linear natural breakup characteristics�
NOTE: Powercab 112 Plus has one signal LED, while Powercab 212
Plus has two signal LEDs�
3. HOME Button - If you ever get lost, press this button to return to the
main Home screen, or press and hold it for 2 seconds to enter the
Global Settings� See "Global Settings" on page 17�
4. Backlit Display - This backlit display shows the current preset on
its Home screen� It can also display the Preset Editing and Global
Settings screens� The display backlight will dim automatically after a
short period of inactivity�
5. SAVE Button - Once you've modied the settings of a given preset,
press Save to conrm the changes, re-name, or copy it to a new
preset location�
6. SELECT Knob - This is the main control for changing presets or their
parameter values� From the Home screen, turn this knob to cycle
through the presets� Press to select and turn to edit the value of the
currently highlighted parameter�
7. LED Ring - This ring indicates the "Color" parameter assigned to the
current preset for easy identication.
+
Powercab 212 Plus allows you to select up to two LED colors,
representing Speaker 1 and Speaker 2�
TIP: Assign dierent colors for user presets to see them from afar�
The LED ring will dim automatically after a short period of inactivity�