User Manual

17
USB Audio Modes
Powercab Plus systems oer two dierent USB Modes for use as your computer or mobile device interface� You can access these options in the
Global Settings (see next section)�
Normal - In this mode, incoming USB audio remains unprocessed,
and is routed directly to the Powercab Plus speaker system for
playback�
Processed - In this mode, incoming USB audio is processed by the
Powercab Plus, adding even greater exibility when used as your
computer's audio interface for amp modeling software, such as the
Line 6 Helix Native plug-in or POD Farm
®
application�
Global Settings
These global parameters allow you to optimize the Powercab Plus system for your particular needs, whether it be for practice, on stage or in the
studio� These settings are persistent (automatically saved) and not part of the preset data�
1. To view Global Settings, press and hold HOME.
2. Turn the SELECT knob to scroll up and down the Global Settings list; press SELECT to toggle between scrolling the list and setting
values.
NOTE: Settings indicated with
+
are available on Powercab 212 Plus only�
+
+
GLOBAL SETTINGS
Name Value Range Default MIDI CC CC VALUE Function
Input 1/L Gain
dB -96�0 to +12�0 0�0 CC 1 0-127
100 = 0�0dB
Adjustable input gain level for Input 1 (Left/Mono)�
+
Input 1/L
Level
Line
Instrument
Line CC 30 0-63: Line
64-127:
Instrument
Controls the input level and impedance for Input 1� Use
Instrument impedance when connecting a guitar or pedals�
Use Line Level for modelers that support line level output�
Input 2/R Gain
dB -96�0 to +12�0 0�0 CC 2 0-127
100 = 0�0dB
Adjustable input gain level for Input 2 (Right/Aux)�
+
Input 2/R
Level
Line
Instrument
Line CC 31 0-63: Line
64-127:
Instrument
Controls the input level and impedance for Input 2� Use
Instrument impedance when connecting a guitar or pedals�
Use Line Level for modelers that support line level output�