User Manual

Amp, Cab & Mic Models
6•3
Amp A
Amp in “Post” position (after Path A & B)
With the Amp in Post as shown above, the parallel Paths A & B are fed into the input
of the Amp.* You can still move FX into either Path A or B, in which case they’ll be in
parallel, with each Path’s output individually controlled by the Mixer’s A & B Level and
Pan options to allow you to custom blend them before they hit the Amp.
*Note: All Amps & Preamps behave as “mono” Models, which impact the stereo output of any
FX Models positioned before them within the signal ow. For more info, please see “Model
Types and Mono/Stereo Signal Routing” on page 3•5
.
Selecting Amp, Cab & Mic Models
Press the VIEW button to display the Signal Flow View and use the Nav. Pad to select
Amp A or Amp B.
The Signal Flow View - Amp B selected
Once an Amp Model is selected, you’ll see the 4 editable Amp options at the bottom
of the screen, accessible via the Multi-function knobs 1 - 4.
• Knob 1 - Selects the Amp or Preamp Model.
• Knob 2 - Selects the Cab Model.