User Manual

24
Pitch/Synth Models (Mono)
Model Based On*
Pitch Wham
Digitech Whammy
®
Twin Harmony
Eventide
®
H3000
Simple Pitch
Line 6 Original
Dual Pitch
Line 6 Original
3 Note Generator
Line 6 Original
4 OSC Generator
Line 6 Original
Bass Octaver
EBS
®
OctaBass
Smart Harmony
Eventide H3000
Octi Synth
Line 6 Original
Synth O Matic
Line 6 Original
Attack Synth
Korg
®
X911 Guitar Synth
Synth String
Roland GR700 Guitar Synth
Growler
Line 6 Original
Filter Models (Stereo)
Model Based On*
Mutant Filter
Musitronics
®
Mu-Tron III
Mystery Filter
Korg A3
Autolter
Line 6 Original
Asheville Pattrn
Moog
®
Moogerfooger
®
MF-105M MuRF Filter
Voice Box
Line 6 Original
V Tron
Musitronics Mu-Tron III
Q Filter
Line 6 Original
Seeker
ZVexSeekWah
Obi Wah
Oberheim
®
voltage-controlledS&Hlter
Tron Up
Musitronics Mu-Tron III (up position)
Tron Down
Musitronics Mu-Tron III (down position)
Throbber
Electrix
®
Filter Factory
Filter Models (Stereo)
Model Based On*
Slow Filter
Line 6 Original
Spin Cycle
Craig Anderton’s Wah/Anti-Wah
Comet Trails
Line 6 Original
Common FX Settings
Parameter Description
Drive
Adjusts the amount of overdrive, distortion, or fuzz.
Bass
Adjusts the bass level.
Mid
Adjusts the midrange level.
Treble
Adjusts the treble level.
Speed
Adjuststhespeedoftheeect,withhighersettingsprovidingfaster
rates. Press the knob to toggle between Hz and note values.
ChoosingaHzvalueprovidesaspecicmodulationspeedincycles
per second; choosing a note value provides a time based on the
current tempo. Not all Speed parameters can be synced to note
values, as they may be non-linear and highly interactive.
Rate
Adjuststherateoftheeect,withhighersettingsprovidingfaster
rates. Press the knob to toggle between numeric and note values.
Not all Rate parameters can be synced to note values, as they may be
non-linear and highly interactive.
Time
Adjusts the delay/repeat time, with higher settings providing longer
delays. Press the knob to toggle between ms and note values.
Choosingamsvalueprovidesaspecictimeinmilliseconds;
choosing a Note Division value provides a time based on the current
tempo. With a note division value, this parameter’s value is retained
when changing models.
Scale
Delay models with multiple taps have a Scale parameter for each tap,
adjustingitstimerelativetothemainTimevalue.Forexample,ifthe
Time parameter is set to 500ms, setting T1 Scale to “50%” will mean
that tap will be at 250ms. If you then adjust the Time parameter, the
timing of all the taps will scale accordingly.
Depth
Adjusts the intensity of the modulation. Higher settings result in more
extremepitchbending,wobble,orthrob,dependingontheeect.
Feedback
Adjuststheamountofdelayedsignalfedbackintotheeect.Higher
settingscanprovidemoredramatictextures.
*See “U.S. Registered Trademarks” on page 29.AllproductnamesusedinthisdocumentaretrademarksoftheirrespectiveownersandneitherYamahaGuitarGroupnorLine6areassociatedoraliatedwiththem.
These trademarks appear solely to identify products whose tones and sounds were studied by Line 6 during sound model development.