User Manual

43
Bypass Assign
Quick Bypass Assign
1. From the Home screen, use the joystick to select the block you
wish to assign to a footswitch.
Input, Output, Split > Y, and Merge blocks cannot be assigned to footswitches.
Split > A/B or Split > Crossover blocks can be assigned to a footswitch; when
bypassed, they behave exactly like Split > Y.
2. Step on FS6 (MODE) to select Stomp mode (if not already
there).
3. Touch and hold (but don’t press) the desired footswitch until
the following dialog appears:
OKCancel
Assign footswitch to bypass selected block?
Type
Latching
Assign
Merge
C
ustom
i
z
e
If you want to replace any other blocks that may already be assigned to the foot-
switch, turn Knob 4 (Assign) to "Replace." Otherwise, leave it set to "Merge,"
which allows for multiple blocks to be assigned to the same switch.
If you want to change the way the switch behaves, turn Knob 5 (Type) to "Mo-
mentary" or "Latching."
Momentary
The block is bypassed (or enabled, if already bypassed) for as long
as you hold the switch.
Latching
The block is bypassed (or enabled, if already bypassed) every time
you press the switch. This is the default.
4. Press Knob 6 (OK).
Manual Bypass Assign
The Bypass Assign screen is where you manually assign blocks to (and un-assign
blocks from) Stomp mode footswitches.
1. Press to open the Menu.
2. Press Knob 1 (Bypass Assign).
The Bypass Assign screen looks very similar to the Home screen:
16B Dream Rig+Vocals
Delay Harmony Delay
None
Footswitch
Bypass Assign
1
C
ustom
i
z
e
3. Move the joystick to select the block you want to bypass from
a footswitch.
Input, Output, Split > Y, and Merge blocks cannot be assigned to footswitches.
Split > A/B or Split > Crossover blocks can be assigned when bypassed, they
behave exactly like Split > Y.
4. Turn Knob 1 (Footswitch) to select footswitch 1, 2, 3, 4, 5, 7, 8,
9, 10, 11, or Exp Toe.
NOTE: Footswitch 1 and 7 can be assigned at any time, but they only appear
if the Stomp Mode Switches option is set to "10 switches" (see "Global Set-
tings > Footswitches"). Otherwise, FS1 and FS7 appear as BANK and
BANK .
NOTE: Adding a Volume Pedal, Pan, Wah, or Pitch Wham block automati-
cally assigns it to "Exp Toe".
NOTE: Each footswitch can have up to 8 assignments. If you attempt to
add a ninth, "Can't assign any more blocks to this footswitch!" appears in
the header:
Can’t assign any more blocks to this footswitch!
Customize
Type
Latching2
Footswitch
Selecting any footswitch (other than Exp Toe) displays Knob 2 (Type):
Delay Harmony Delay
Type
Latching2
Footswitch Customize