User Manual
40
Copying/Pasting a Snapshot
Instead of creating a new snapshot from scratch, you may want to copy an existing
one to another snapshot location and tweak just a few things. There are actually two
ways to do this:
Quick Copy/Paste Snapshot from Footswitches
1. Press BANK and BANK simultaneously to enter Snapshot
footswitch mode.
2. While touch-holding the footswitch for the snapshot you want
to copy, briey touch and release the footswitch for the snap-
shot you want to overwrite.
A dialog panel appears:
OKCancel
Copy Snapshot 4 to Snapshot 5?
3. Press Knob 6 (OK).
Copying/Pasting a Snapshot from the Front Panel
1. Press PRESETS to open the Setlist menu and turn Knob 5
(Select Snapshot) to select the snapshot you want to copy.
2. Press ACTION and then Knob 1 (Copy Snapshot).
Helix returns to the Setlist menu.
3. Turn Knob 5 (Select Snapshot) to choose the snapshot you
want to overwrite.
4. Press ACTION and then Knob 2 (Paste Snapshot).
A dialog panel appears:
OKCancel
Copy Snapshot 4 to Snapshot 5?
5. Press Knob 6 (OK).
Swapping Snapshots
1. Touch (but don't press) the two snapshot switches you want to
swap until the following dialog appears:
OKCancel
Swap Snapshots 1 and 5?
2. Press Knob 6 (OK).
Renaming a Snapshot
Insteadofhavingtorememberthedierencebetween"SNAPSHOT1"and"SNAP-
SHOT 2," it's helpful to rename your snapshots something descriptive, such as
“VERSE,” “BIG SOLO,” or “D. IGLOO.”
1. Press PRESETS to open the Setlist menu.
2. Press Knob 6 (Rename Snapshot).
The Rename Snapshot screen appears:
Cancel Delete Insert
Rename Snapshot
OK
SNAP OTHS
1
R
T
U
V
P
Q
R
emov
e
Move the joystick left or right to move the cursor. Snapshot names are limited
to 10 characters.
Turn the joystick (or move it up/down) to change the selected character.
Press Knob 2 (Delete) to delete the selected character and shift all following
characters to the left.
Press Knob 3 (Insert) to insert a space and shift all following characters to
the right.
SHORTCUT:PressthejoysticktocyclethroughA,a,0,and[SPACE].
Press Knob 4 (Remove) to remove the custom name. Remove is grayed out
until a custom name is applied.
3. Press Knob 6 (OK).
Snapshot names are only retained if you save the preset. See below.