User Manual

20
...or maybe a single Amp block splitting into two separate Cab blocks...
...or two separate Amp and two separate Cab blocks...
...or two separate Amp blocks merging into a Cab > Dual block.
Remember, this is only half of your tone. You still have Paths 2A and 2B to play with!
Removing Parallel Path B
To remove path B, simply clear any blocks on path B (lower) or
move them all back up to path A (upper).
Moving Split & Merge Blocks for More
Parallel Routings
1. Use the joystick to select the point where paths A and B split
or merge.
"Split" and "Merge" blocks only appear when selected, but can be adjusted and
moved like any other processing block.
2. Press ACTION to pick up the Split or Merge block for moving.
Choose one of the following parallel routing options:
2 into 1
Move the Split block down to path B.
The Split block shifts left and a duplicate Input block is created:
ThisnewInputblockcanbeassignedtoacompletelydierentinput.Thisrouting
can be used for mixing a guitar and vocal, or the models and magnetic pickups in a
connected Variax guitar, each with their own processing blocks.
1 into 2
Move the Merge block down to path B.
The Merge block shifts right and a duplicate Output block is created:
In this example, the Input block is split to paths A and B, each with its own Output
block. Path A could be routed to the 1/4” outputs while path B could be routed to
the XLRs.