User Manual
Firehawk Remote Mobile Application
Stomp Classic Distortion
Drive
Gain
Tone
68%
43%
50%
Lead the Way
FS1 FS2 FS3 FS4 FS5
Variax Gate Wah Stomp Mod Delay
FX Loop
Vol Amp+Cab EQ Comp Reverb
Looper
A
C
E
B
D
F
G
H
Firehawk Remote App - Editor Screen
A. Menu/Back Button - Tap to reveal the slide-out Main Menu screen.
(See the following App Features section for more info.) This button
changes to a Back button within other screens.
B. Preset Title - The title for the current Preset is shown here.
C. Signal Flow Pane - Each icon button represents a Processing Block
and shows the routing order and bypass state of all eects for your
current tone. Tap on any Block here to select it and the Block's
options are displayed within the Inspector Pane below.
D. Processing Blocks - Each of the several Block types oers its own
properties and functions. Many Blocks are moveable within the
signal chain, as indicated below. To move a Block, press, hold and
drag the Block left/right in the signal chain - vertical line indicators
show all available locations where you can "drop" the Block.
• Variax Input Block - Provides options for a Line 6 Variax guitar. See
the following Using a Line 6 Variax section.
• Standard Blocks - The Amp & Cab Block contains your choice of
Amp & Cab models, and the others include a "xed" eect (Comp
and Gate). Standard Blocks cannot be moved.
• FX Blocks - Contain a dedicated eect type (Volume, Wah &
Reverb) and have some moveability.
• Flex FX Blocks - Can change the FX type they contain (Stomp,
Mod, Delay or Pitch/Synth) and have more exible routing
capabilities.
• Looper Block - Displays its Volume and EQ parameters below.
The Looper can also be assigned to any one of the FS1-FS5
footswitches and can be moved to either the start or end of the
signal chain - see the Using the Looper section for details.
E. Block Inspector Pane - All editable parameters for the selected
Block are presented here.
F. Model Select and Bypass Buttons - The Model Select button (at
the left) pops up a menu to choose an Amp, Cab or FX model for the
selected Block's type. The Bypass button toggles the Block On/O.
G. Parameter Sliders - Allow adjustment for all settings for the selected
Block's Amp or FX models. Note that you can press and hold a
slider to assign the parameter to be controlled by the FX Knob and
Expression Pedal (see Conguring Pedal Functionality above).