User Manual

6 7
Rear Panel Connections
12 13 14 159 10 11
9. Amp Out - The Amp Out provides a 1/4 inch mono output of
guitarprocessedwithampmodelingandeectsandoptimizedfor
connecting to the input of a guitar amp. Bluetooth audio is not sent
to the Amp Out.
Using Main Outs & Amp Out Together - Only Bluetooth audio will
be present at the Main Outs when the Amp Out jack is connected.
10. RCA Main Outs - The RCA Main Outs provide full range audio,
sending out a mix of processed guitar and any Bluetooth audio that
may be streaming to the unit. Plug RCA cables to the RCA Main Outs
to connect to any number of destinations, such as a home stereo or
portable speaker system.
11. 1/4 inch Main Outs - The 1/4 inch Main Outs also provide full range
audio, sending out a mix of processed guitar and any Bluetooth
audio that may be streaming to the unit. Plug 1/4 inch cables into
these outputs to connect to a destination with 1/4 inch inputs, such
as a mixing console, PA or powered monitors.
12. Optical Out - TheOpticalOutprovidesa48kHzS/PDIFdigitalmix
of processed guitar and any Bluetooth audio that may be streaming
to the unit. Plug an optical cable into this output to connect to any
number of destinations, such as a home theater receiver or soundbar.
13. USB Input - Connect to a Mac or PC USB port to use AMPLIFi TT
as a stereo in-out USB audio interface for recording or playback with
your audio and multimedia applications.* USB connectivity is also
therecommendedwaytoperformAMPLIFirmwareupdateswith
Line 6 Updater (please see "AMPLIFi Firmware Updates" on page
7).
*NOTE: Before connecting to a Windows based computer,
you'll need to rst download and install the latest AMPLIFi USB
Device Driver, available from http://line6.com/software. (No driver
installation is necessary for Mac computers.)