User Manual

4 5
1. Power Switch - Turn on the power with this push-button switch.
2. Guitar Input - Plug in your 1/4 inch guitar cable here. Run the
AMPLIFi amp in standalone mode or with the AMPLIFi Remote app.
3. Headphones - Plug in your 1/4 inch stereo headphones cable here.
Headphone volume is controlled by the Master Volume knob.
4. Bluetooth Pairing Button - Using Bluetooth, your AMPLIFi TT will
communicate wirelessly with your iOS or Android device. Before you
run the AMPLIFi Remote app, set up Bluetooth with your mobile
device as follows:
• Enter Pairing Mode on your AMPLIFi TT by pressing its Bluetooth
button-itwillash.
• Enter Bluetooth Pairing Mode within the Settings of your iOS
device, or open the Bluetooth Settings menu on your Android
device.
• Your AMPLIFi TT device's unique name will appear on your iOS
device. Android users may need to select "Scan for Devices"
to refresh the list of available Bluetooth devices.
• Select your AMPLIFi TT device's unique name to establish the
connection-thiscompletesthepairingcongurationandyou
are ready for wireless operation!
It is also possible to use your Mac or PC computer's Bluetooth
connection (if so equipped) to stream the computer's audio playback
wirelessly to AMPLIFi TT. First enter Pairing Mode on your AMPLIFi
TT by pressing its Bluetooth button so that it is ashing, then
congureyourcomputerasfollows:
• On a Mac - Go to the Applications > System Preferences >
Bluetooth window, turn Bluetooth on and the computer will scan
for devices. Once it nds and lists your AMPLIFi TT device's
unique name, click on the "Pair" button in the window to establish
the connection.
• On a PC - Click the Start button and go to the Settings > Devices
> Bluetooth window, turn Bluetooth on and the computer will
scanfordevices.OnceitndsandlistsyourAMPLIFi TT device's
unique name, click on the "Ready to Pair" item in the window to
establish the connection.
5. Tone Controls - When using AMPLIFi Remote with your iOS device,
all Tone adjustments can be made using the app Editor. You can also
tweak your guitar sound manually with these onboard Tone controls:
DRIVE: Adjusts the current amp model's Drive level.
BASS, MID, TREBLE: Adjusts the Bass, Mid and Treble levels for
the current amp model's tone stack.
REVERB: Adjusts the Reverb level for the current preset.
6. Master Volume Knob - This big knob controls the overall output
level of your AMPLIFi TT. It also has a Secondary Function of
adjusting your guitar level relative to the overall audio mix. This can
be useful when you're jamming to a track and your guitar level is too
soft or too loud.
To achieve a good balance, simply press the Master Volume knob to
activate its Secondary Function, then set your guitar level as desired.
After 5 seconds, the knob reverts to Master Volume control.
Master Volume LED RIng
Master Volume LED Ring - The ring of LEDs surrounding the Master
Volume knob lights up in various ways, depending on the current
parameter being adjusted, as follows:
• Master Volume: LEDs are lit red to indicate Master Volume level.
• Guitar Level: when the Secondary Function is activated via knob
press, all LEDs are lit white; as your guitar level is adjusted, LEDs
are lit white.
• Tone Controls: when an individual Tone Control is adjusted, the
saved level is indicated in red; all other LEDs are lit white to display
the current level as you turn the knob.