User Manual

4 5
1. Bluetooth Pairing Button - Using Bluetooth, your AMPLIFi FX100
will communicate wirelessly with your iOS or Android device. Before
you run the AMPLIFi Remote app, set up Bluetooth with your mobile
device as follows:
• Enter Pairing Mode on your AMPLIFi FX100 by pressing its
Bluetooth button - it will ash.
• Enter Bluetooth Pairing Mode within the Settings of your iOS
device, or open the Bluetooth Settings menu on your Android
device.
• Your AMPLIFi FX100 device's unique name will appear on your
iOS device. Android users may need to select "Scan for
Devices" to refresh the list of available Bluetooth devices.
• Select your AMPLIFi FX100 device's unique name to establish
the connection - this completes the pairing conguration and
you are ready for wireless operation!
It is also possible to use your Mac or PC computer's Bluetooth
connection (if so equipped) to stream the computer's audio playback
wirelessly to AMPLIFi FX100. First enter Pairing Mode on your
AMPLIFi FX100 by pressing its Bluetooth button so that it is ashing,
then congure your computer as follows:
• On a Mac - Go to the Applications > System Preferences >
Bluetooth window, turn Bluetooth on and the computer will scan
for devices. Once it nds and lists your AMPLIFi FX100 device's
unique name, click on the "Pair" button in the window to establish
the connection.
• On a PC - Click the Start button and go to the Settings > Devices
> Bluetooth window, turn Bluetooth on and the computer will
scan for devices. Once it nds and lists your AMPLIFi FX100
device's unique name, click on the "Ready to Pair" item in the
window to establish the connection.
2. Tone Controls - When using AMPLIFi Remote with your iOS or
Android device, all Tone adjustments can be made using the app
Editor. You can also tweak your guitar sound manually with these
onboard Tone controls:
DRIVE: Adjusts the current amp model's Drive level.
BASS, MID, TREBLE: Adjusts the Bass, Mid and Treble levels for
the current amp model's tone stack.
FX: Adjusts the FX parameter assigned to the Tweak knob as part of
the preset. This assignment can be edited in the AMPLIFi Remote
application.
REVERB: Adjusts the Reverb level for the current preset.
3. Master Volume Knob - This big knob controls the overall output
level of your AMPLIFi FX100. It also has a Secondary Function of
adjusting your guitar level relative to the overall audio mix. This can
be useful when you're jamming to a track and your guitar level is too
soft or too loud.
To achieve a good balance, simply press the Master Volume knob to
activate its Secondary Function, then set your guitar level as desired.
After 5 seconds, the knob reverts to Master Volume control.
Master Volume LED Ring
Master Volume LED Ring - The ring of LEDs surrounding the Master
Volume knob lights up in various ways, depending on the current
parameter being adjusted, as follows:
• Master Volume: LEDs are lit red to indicate Master Volume level.
• Guitar Level: Press the Master Volume Knob to adjust guitar level.
White LEDs indicate the current level of the guitar.
• Tone Controls: When an individual Tone Control is adjusted, the
saved level is indicated by a single red LED: all other LEDs are lit
white to display the current level as you turn the knob.