AMPLIFi FX100 PILOT’S GUIDE MANUEL DE PILOTAGE PILOTENHANDBUCH PILOTENHANDBOEK MANUAL DEL PILOTO 取扱説明書 40-00-0357-D Firmware v2.50.2 Pilot’s Guide also available at line6.com/support/manuals ©2016 Line 6, Inc.
Please Note: Line 6 and AMPLIFi are trademarks of Line 6, Inc., registered in the U.S. and other countries. All rights reserved. Apple, Mac, iPod touch, iPhone and iPad are trademarks of Apple, Inc. registered in the U.S. and other countries. App Store is a service mark of Apple, Inc. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iOS is a trademark of Cisco in the U.S. and other countries.
THE EFFECTS PEDAL, REINVENTED. AMPLIFi FX100 Features • High-performance floor effects processor • Bluetooth streaming audio device (compatible with iOS, Android, and Mac or PC) AMPLIFi FX100 is more than a floor effects processor. It’s an entirely new guitar experience. ® You can stream music wirelessly from any Bluetooth® enabled device directly to the pedal—perfect for jamming, playing songs at rehearsals and cranking up the volume on your music library & jam tracks.
1. Bluetooth Pairing Button - Using Bluetooth, your AMPLIFi FX100 will communicate wirelessly with your iOS or Android device. Before you run the AMPLIFi Remote app, set up Bluetooth with your mobile device as follows: DRIVE: Adjusts the current amp model's Drive level. BASS, MID, TREBLE: Adjusts the Bass, Mid and Treble levels for the current amp model's tone stack. FX: Adjusts the FX parameter assigned to the Tweak knob as part of the preset.
4. Preset Select Footswitches - 4 presets are stored within each preset bank in the AMPLIFi FX100 internal memory: Presets A, B, C and D. A preset stores all of the amp and effects parameters that define the characteristics of the tone. 6. TAP Tempo Button - Pressing the TAP Tempo button a few times sets the tempo of delays and other FX that sync to tempo. Tuner Mode - Press and hold the TAP button for a few seconds to enter Tuner Mode.
Rear Panel Connections 8 10 11 8. Guitar Input - Plug in your 1/4 inch guitar cable here. 9 12 13 14 *NOTE: Before connecting to a Windows based computer, you'll need to first download and install the latest AMPLIFi USB Device Driver, available from http://line6.com/software. (No driver installation is necessary for Mac computers.) 9. Headphones - Plug in your 1/4 inch stereo headphones cable here. Headphones volume is controlled by the Master Volume knob. 10.
AMPLIFi Remote Mobile Application The free Line 6 AMPLIFi Remote mobile app is available for iOS and Android devices. To get the latest version: • For the iOS application - please visit the Apple App Store. • For the Android application - please visit the Google Play™ store. NOTE: For details on using the AMPLIFi Remote app, please download the AMPLIFi Remote Pilot's Guide, available from http://line6.
