Owner's Manual

POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In
4•30
Selecting a Model - Clicking once on any model icon “selects” the model, as indicated by the amber
“corners” that appear around it.
Selected Model Non-Selected Model
Mixer Control
Click on the Mixer Control icon to enter the Mixer View, where individual Tone level and input/
output settings can be made.
Mixer Control
Please see the “Mixer View” on page 4•25 for details about all settings within the Mixer.
A/B Switch Box Control
When your POD Farm 2 Tone conguration consists of a Dual Tone, where each Tone’s input source is
the same mono audio channel, you’ll see this A/B Switch Box at the left of the Signal Flow View. (See
the “Mixer View” on page 4•25 for more about Tone input source selection.) Just like a hardware “A/B”
type switch box, this allows you to choose the destination signal path(s) for your input signal. Click
directly on either of the switch buttons on the A/B Switch Box.
A/B Switch Box Control
• Click the left A/B switch to toggle your input signal to be fed to only Tone A or only Tone B.
The red lights on the box indicate which Tone is active.
• Click the right A+B switch to feed your input signal through both Tones A and B simultaneously.
Both red lights illuminate to indicate the A+B mode.
TIP: You’ll see the A/B Switch Box is also conveniently located within the Mixer View panel - it performs
the same functions as listed above.