Quick Start Manual

GettinG Started

MIDI Mobilizer II is compatible with CoreMIDI apps on Apple

mobile devices and iOS versions that support CoreMIDI.

Check your Apple device to be sure you have the latest version

of the operating system installed before continuing.

1. In order for the MIDI Mobilizer II to receive ﬁrmware

updates, it requires a free Line 6 app, MIDI Memo Recorder.

If it has not been downloaded prior to attaching the MIDI

Mobilizer II to your Apple device, a dialog box will appear

to give you the option to download it. It can also be

downloaded at any time by searching for it in the App Store

by its name.

2. Connect MIDI Mobilizer II to iPod touch, iPhone, or iPad.

3. Connect the male 2.5 mm TRS plugs of the included cables

to the MIDI Mobilizer II.

4. Connect the male MIDI connector jacks to the MIDI In

and Out of your Line 6 or other MIDI compatible device

like the keyboard shown in the example above.

! Observe proper connection. Arrow pointing away from the

Apple device connects to MIDI In of the device you are

connecting to. Arrow pointing towards the Apple device

connects to MIDI Out of device you are connecting to.

USinG the Midi MeMo

recorder app

The MIDI Memo Recorder app can be used to record any MIDI

data that is received at the MIDI Mobilizer II’s input, including

System Exclusive (SysEx) data, and notes and controllers from

any MIDI channel. Whatever comes in can be captured, stored,

and played back.

To record a Memo, just slide the ENABLE RECORDING

slider to the right, and then press the red RECORD button.

The recording will begin once the ﬁrst MIDI data is received,

and the LENGTH display will advance counting minutes and

seconds of the recording. The SIZE display will show the

number of MIDI bytes that have been received. Press the red

STOP button when ﬁnished. Each time Record is entered, a

new recording (Memo) is created, so you can never accidently

erase a recording. If an existing Memo is already selected when

Record is entered, then a new Memo will be created by adding

a number to the name of the ﬁle.

To play back a Memo, press the green PLAY button. The

counter display will advance as the playback continues. The

playback will end when the end of the Memo is reached, or

when STOP or PAUSE is pressed.