Pilot's Guide

Allparametersaffectedbyanexpressionpedalwillshowapixelnotchat
thetopindicatingaparameter’ssettingforthetoepositionofthepedal.
You’llalsoseeanotchatthebottomthatindicatesaparameter’ssetting
with the expression pedal in the heel position.
NOTE: In any case, the
bar graph will automatically never display in the areas above the right-
most pixel or below the left-most pixel, since these are the extremes that
thepedal’sparametercontrolaresettogoto.Ifnoexpressionpedalheel
and toe values are set for a particular parameter, there will be no pixel
cutout in the graphic.
TIP: If you want to “clear out” your expression
pedal settings: Disconnect your expression pedal momentarily, tweak
any parameters that you want to “clear” the expression pedal control of,
and reconnect your pedal to start fresh with setting up your expression
pedal control settings for those parameters.
midi ContRol
TheM5willsendandreceiveMIDICCandProgramChangemessages
on any MIDI Channel from 1 thru 16 or Omni, selectable from the
MIDIscreeninSetupmode.MIDIimplementationincludesMIDICCs
forFXUnitOnandBypassmessages,TapTempo,ExpressionPedalCCs
andProgramChangemessagesforpresets.YoucancontroltheM5from
aMIDIcontrolleroracomputersequencer.
TheMIDIReferenceTablesbelowrepresentthecurrentlyimplemented
MIDIspec.
FUNCTION MESSAGE VALUE RANGE NOTES
Preset Change PC 0-23 (Corresponds to
Presets 01-24)
Tap Tempo CC#64 64-127
FX on/off CC#11 0-63 (Bypass)
64-127 (On)
Expression Pedal CC#01 0-127
Tuner Mode on/off CC#69 0-63 (Exit)
64-127 (Enter)
Sync to MIDI clock MIDI Beat Clock Tap Tempo - enabled FX automatically
sync to incoming MIDI Beat Clock
when it is received